3D Printed V-Dipole Holder for Our RTL-SDR Blog Multipurpose Dipole Kit

Over on Thingiverse user f16v1per has created a 3D printed bracket that can help with securely holding our multipurpose dipole kit at a 120 degree angle, which is the perfect angle to use when in a V-Dipole configuration. A V-Dipole is simply a dipole antenna spread at 120 degrees, placed horizontal to the ground, and typically oriented in a North-South direction for receiving weather satellites.

Back in 2017, Adam 9A4QV wrote about how a V-Dipole could be used as a very simple yet effective antenna for receiving weather satellites. Since then it has become a popular beginners choice for receiving polar orbiting satellites like NOAA and Meteor M2.

3D Printed V-Dipole Angle Spacing Bracket
3D Printed V-Dipole Angle Spacing Bracket

One comment

Leave a Reply to Orc Cancel reply

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>