Search found 44 matches

by Remon
Sun Jul 21, 2019 12:38 am
Forum: Signal Identification Help
Topic: POGSAG like signal on 25.358Mhz
Replies: 4
Views: 1424

Re: POGSAG like signal on 25.358Mhz

It's most likely an on-site paging system, often used by hospitals.
by Remon
Mon Nov 05, 2018 12:53 am
Forum: Off-Topic
Topic: Finding a signal frequency Via type of antena
Replies: 1
Views: 14372

Re: Finding a signal frequency Via type of antena

In which country or state do you live? You can try to figure out what horns are used, what their size it is and determine the yagi element sizes. Then use an online yagi calculator to find out the frequency.
by Remon
Wed Oct 10, 2018 10:44 pm
Forum: Signal Identification Help
Topic: Unknow signal
Replies: 9
Views: 22541

Re: Unknow signal

It's Mobitex: https://en.wikipedia.org/wiki/Mobitex I got dozens of these signals in my area: http://i66.tinypic.com/qnkbac.png About 15 years ago police and ambulances used this system for the data terminal+screens in their cars... It was all clear text back then when I used a 2-level modem on a sc...
by Remon
Wed Oct 10, 2018 10:13 pm
Forum: Signal Identification Help
Topic: Is this a weather balloon?
Replies: 2
Views: 14496

Is this a weather balloon?

I found this strong signal in the low 400MHz's:

Image

Audio:

https://instaud.io/2MLh
by Remon
Mon Sep 17, 2018 9:23 pm
Forum: Signal Identification Help
Topic: Unknown high pitch continues beep with data bursts
Replies: 3
Views: 15545

Unknown high pitch continues beep with data bursts

Received in the Netherlands while there are pretty good atmospheric conditions:

Image

Audio:

https://instaud.io/2H3Z
by Remon
Tue Aug 28, 2018 3:36 pm
Forum: RTL-SDR Discussion
Topic: Internal gain vs external amplifier
Replies: 3
Views: 2416

Internal gain vs external amplifier

Is it worth buying a Jim M75 amplifier or will I get similar results with the internal gain?
by Remon
Wed Aug 22, 2018 1:08 am
Forum: RTL-SDR Discussion
Topic: Popping noises
Replies: 5
Views: 2858

Re: Popping noises

I can test it but I can tell you in advance that rtl_tcp use much less CPU load than SpyServer. My Raspberry Pi 3B+ is idling 98.8% at all times.
by Remon
Mon Aug 20, 2018 12:42 am
Forum: RTL-SDR Discussion
Topic: Popping noises
Replies: 5
Views: 2858

Re: Popping noises

I'm running the dongle at 2.048 MSPS over a local LAN network with rtl_tcp. I'm currently testing my spare dongle for 2 days with no issues at all. This is the rtl_test output after letting it run for 5 minutes from the dongle without problems: [email protected]:~/rtl-sdr $ rtl_test Found 1 device(s): ...
by Remon
Sat Aug 18, 2018 2:02 am
Forum: RTL-SDR Discussion
Topic: Popping noises
Replies: 5
Views: 2858

Popping noises

Does anyone else have popping noises during listening? It sounds like a recording with a microphone without wind screen / pop filter. I do hear it mostly on the 70 cm band. I can hear it during transmissions but also with static noise while there is no signal. With audio filtering enabled the poppin...
by Remon
Fri Aug 17, 2018 12:21 am
Forum: Troubleshooting Help
Topic: Decoding Issues
Replies: 8
Views: 4179

Re: Decoding Issues

You also should set the bandwidth to 34 kHz instead of 250 kHz