rtl-sdr.com

Make please new version extio for hermes/odyssey2 , with extended gain control . And other functions - input attenuator and ... etc . Thanks . Unfortunately I don't have odyssey2 hardware, so I cannot test it. This version with an adaptation to the Sharp 1732 version gives an error What error exact...

nsinbc wrote: ↑

Fri Mar 12, 2021 1:14 am

[*]The recommended "starter" devices, which are definitely in my price range (the RTL-SDR Blog brand R820T2 RTL2832U, both kit and standalone SKUs) are out of stock for the next month or more.

That's not true. RTLSDRv3 in stock: https://www.aliexpress.com/item/32939551915.html

if you enable it, it remains while rtlsdr dongle is still powered from USB. If you unplug it from USB (or power off USB connector), it will return to the default state.

you can use this EXTIO with HDSDR: https://www.rtl-sdr.com/forum/viewtopic.php?f=1&t=4710&start=20#p11796 If you use rtlsdr.dll which is included with this EXTIO, just open EXTIO dialog and you will see the current bias-tee state, also you can enable or disable it from EXTIO dialog, just with simple...

What do you mean "the most current"? The latest version is here viewtopic.php?f=1&t=4710&start=20#p11796

UncleVinny wrote: ↑

Mon Oct 26, 2020 1:53 pm

What we NEED is a program that self-installs and walks you through the process.
We need standards, instructions that work, a guide book, timely feedback from professionals.

all instructions are present on internet. There are a tons of instructions.

How can I test the dongle? you can test it with HDSDR and signal generator, for example FY6800 or PSG9800 1) Start HDSDR 2) Select Bandwidth = 2400000 Hz 3) Open Options => Calibration settings 4) Select S-meter Calibration tab and press Reset button to reset S-meter calibration to default 5) close...

And some signals are wide-band, but are still partially usable without hardware RF front-end anti-alias filtering. For instance plenty of people use RTL-SDR v.3's in direct sampling mode, and those devices do not anti-alias out signals above and/or below 14.4 MHz. But the RTL2832 still does later a...