Search found 505 matches

by Username
Tue Jun 06, 2017 8:54 am
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

Calibrate to what? What I am I correcting the frequency to? an Weather Channel or any other Static Channel who get professional equitment. You put the RF Gain to the right side and select Offset Tuning, RTL AGC ? You cant see anything because the Antenna have no Gain and the Dongle also have no Gai...
by Username
Mon Jun 05, 2017 11:14 pm
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

Any advice as to what I am doing wrong?
again ok? :roll:
Remove the Upconverter and deselect Shift.
Calibrate your Dongle who I say before ok?
by Username
Mon Jun 05, 2017 12:56 pm
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

the dongle is ok but not the best quality. Go on ebay: http://stores.ebay.de/NooElec And search for: NESDR SMArt some are with "metal case" and some with "alu case". I have "both" but i cant say what the different is between. If you want buy a special search for: NESDR SMArt // E4000 The E4000 are b...
by Username
Mon Jun 05, 2017 11:27 am
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

:D just look on the picture you see when you switch there is nothing between imput and output.

Can you post a link of that product you bought?
by Username
Mon Jun 05, 2017 10:11 am
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

http://www.nooelec.com/store/ham-it-up.html ok when i look on the Schematic on there website when you switch to "Pass trouth" the Signal goes directly from RF Input to the RF Output so no LNA between. :D So you need an separated LNA!!! If you would receive anything above 30Mhz: a) remove the Upconve...
by Username
Mon Jun 05, 2017 9:47 am
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

What is LNA? You mean a Low Noise Adapter? Yes I am presuming that is the upconverter. Maybe the have some build in. Which one do you use? But you have to remove it when you want Receive anyhing above 30Mhz!!!!! That mean you have no LNA at the moment... Can you solder and or have a powersupply? If...
by Username
Mon Jun 05, 2017 9:16 am
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

to get the Airport Weather channel your setup should be:
Antenna -> LNA -> SDR Dongle -> USB Cable
(sure short antenna cable if required)

Where are you from?
by Username
Mon Jun 05, 2017 8:56 am
Forum: RTL-SDR Discussion
Topic: How do I use RTL-TCP?
Replies: 10
Views: 18494

Re: How do I use RTL-TCP?

hopefully here is someone who have more knowledge than me... Its possible to run 2, 3, 4, 5, 6,... rtl-tcp at the same time? Its possible to use the use on the server side the serial number? what is the maximal bandwith who are supported? there are a lot of wideband sdr on the market.... I hope gnu ...
by Username
Mon Jun 05, 2017 8:51 am
Forum: RTL-SDR Discussion
Topic: How quickly can the RTL-SDR be tuned?
Replies: 3
Views: 3960

Re: How quickly can the RTL-SDR be tuned?

the problem is its quite hard to get burst and digital signals.
by Username
Mon Jun 05, 2017 8:48 am
Forum: RTL-SDR Discussion
Topic: Not very successfull with SDR - Advice
Replies: 50
Views: 27803

Re: Not very successfull with SDR - Advice

sorry i dont understand what you do... 1) put everythink on default settings 2) search on google for your local weather channel from the next Airport. for example Depature/ Arrival Information the transmit 24/7 an Automatic Audio Broadcast. If you not have any try an Amateur Radio Repeater. 3) klick...