Search found 2814 matches

by rtlsdrblog
Sat May 31, 2014 12:01 am
Forum: RTL-SDR Discussion
Topic: Why no cheap 2-3 ghz sdrs?
Replies: 3
Views: 8188

Re: Why no cheap 2-3 ghz sdrs?

Not sure why you're not seeing results, I get 136 results. Here is one example http://www.aliexpress.com/item/brand-ne ... 33899.html.
by rtlsdrblog
Thu May 29, 2014 10:33 pm
Forum: User Projects
Topic: AIS
Replies: 23
Views: 90230

Re: AIS

Looks good but I cannot download the zip file, it just says the file is invalid.
by rtlsdrblog
Thu May 29, 2014 1:00 am
Forum: RTL-SDR Discussion
Topic: Auto anti-drift calibration using pc clock or noah?
Replies: 1
Views: 4569

Re: Auto anti-drift calibration using pc clock or noah?

You can always use the software kalibrate to get an accurate PPM measurement from GSM signals. Problem is accuracy drifts as the dongle heats. Not sure if you could sync them with PC clocks, would be a good question to ask on the rtlsdr IRC channel (http://webchat.freenode.net/?channels=##rtlsdr), l...
by rtlsdrblog
Thu May 29, 2014 12:55 am
Forum: Troubleshooting Help
Topic: DVB-TSTICK serial number problem
Replies: 3
Views: 22513

Re: DVB-TSTICK serial number problem

This is for watching TV right?

Don't know if it's the same software but this link from a Chinese dongle factory http://download.buytra.com/driver/SPC-0155-Driver.zip comes with a serial number. If you've installed the DVB-T drivers its better to use www.progdvb.com/ for TV watching anyway.
by rtlsdrblog
Thu May 29, 2014 12:49 am
Forum: RTL-SDR Discussion
Topic: Why no cheap 2-3 ghz sdrs?
Replies: 3
Views: 8188

Re: Why no cheap 2-3 ghz sdrs?

Main reason is that the RTL-SDR (e4000, r820t) is an SDR by accident. They're cheaply mass produced in China for a massive world market for watching DVB-T Digital TV. Some clever third parties hacked the dongle and found it had an SDR mode that could be enabled in software and here we are. HackRF an...
by rtlsdrblog
Sun May 25, 2014 4:28 am
Forum: RTL-SDR Discussion
Topic: ADS-B signal
Replies: 1
Views: 5077

Re: ADS-B signal

Not sure if that is ADS-B, it could be if it looks like lots of short pulses. Why don't you try ADSB# or RTL1090 and see if it picks up ADS-B packets?
by rtlsdrblog
Sun May 25, 2014 4:25 am
Forum: RTL-SDR Discussion
Topic: First contact RTL-SDR.
Replies: 1
Views: 4900

Re: First contact RTL-SDR.

What exactly doesn't work? As in the code won't run? Post the error message and attach the grc file if you can.
by rtlsdrblog
Sun May 25, 2014 4:22 am
Forum: Troubleshooting Help
Topic: Getting SDR running
Replies: 1
Views: 5433

Re: Getting SDR running

There definitely should be a blue light when plugged in, even if the drivers aren't installed. The blue light not illuminating could mean something is wrong with the stick. There is about a 1-2% chance of receiving a faulty stick so contact Nooelec support if you feel it's faulty. But if you're rece...
by rtlsdrblog
Mon May 19, 2014 1:32 am
Forum: Troubleshooting Help
Topic: No Signals RTL2832U 820T
Replies: 1
Views: 6585

Re: No Signals RTL2832U 820T

Those spikes just look like interfering noise to me. Is your RTL-SDR connected directly to the PC? Try using a USB extension cable with some ferrites wrapped around it. Perhaps your signals are getting blocked by something. How high are you able to get the antenna? Also can you receive other signals...
by rtlsdrblog
Tue May 13, 2014 11:22 pm
Forum: RTL-SDR Discussion
Topic: RTL Dongle
Replies: 2
Views: 7926

Re: RTL Dongle

I have HDSDR and a Kenwood TS440at with CAT Control. I can interface the 440 with Ham Radio Deluxe. I also have Omni-Rig installed. Now, how does the RTL dongle tie into the system? Does the dongle tie into my HF Vertical and is that the RF feed to the computer and the HDSDR program? Also, if the R...