rtl-sdr.com

I don't know if anyone knows that a lot of disk cone antenna don't have the right connector on them and your problem could be that you have a antenna with the wrong connector on it . A disk cone antenna that is rated at 25 mhz to 1300 mhz should have a female N connector on it . Here is what Ampheno...

I don't know if you have seen this but here it is . I found this on Reddit forum , I hope this explains why the Mirics dongle never made it . Information on Mirics Chipset for General SDR applicationsNews/discovery (self.RTLSDR) submitted 2 years ago by Mirics Background Several years ago, Mirics de...

I thank you . Kenn , snn47 , Administration . I had to smile when I readed about the stainless steel sheet metal screws , that was the first that I did . The DC resistance of the loop was only was four ohms . Also for those who would like to know the aluminum flashing on my house is four inch's wide...

I will start with what I have now for a setup , then I will get into what I hope I can do . I have a V3 dongle and I have a MfJ - 1020C pre-selector in front of it . Now for a HF antenna I am using the aluminum flashing on the eves of my house . This gives me a 246 foot horizontal loop antenna that ...

I came across this and if it,s true about the receiver Sensitivity: being at 0.05 uV at 20M band, preamp = 0 than I think it may be as good Windradio . It has my interest and I am looking foreword to getting one when they hit the market . https://sunsdr.eu/product/colibrinano/?utm_content=buffer3eea...

The satellite splitter /combiners I think use a voltage to switch to different antennas that is supplied buy the satellite receiver . For myself I use an A/B switch and it work"s just fine .

For frequencies above 50MHZ a disc cone antenna it a good choice . Just be careful about the connector that comes with the antenna . You don't want a disc cone that has a PL-259 connector on it . That connector frequency only go's to the high 300MHZ . A disc cone antenna that has a female N connecto...

I hope that someone here is using Studio1 software with the V3 dongle . I am having problem with getting the software it run , it loads in the computer okay .
When I press the run button I get a audio input error message . Also under main settings it tells me that their is no Extio . dill found .

Hi ClipArt .
If I may add my two cents to this . The 1:16 RF transformer that he is talking about comes from Mini-Circuits it's a ADT16-6T the other 1:16 RF transformer you can use is from Coilcraft and it's number is C 16-A . If you have any questions just do another post .

I would like to add more information that I hope people would find helpful . After playing around with the V3 dongle for a couple weeks I would like to say that the V3 and the MFJ1020c is a very good match . The reason why I say that is that MFJ1020c is only pre-selector that can attenuate a strong ...