Search found 25 matches

by Corrosive
Wed Mar 27, 2019 12:26 pm
Forum: KerberosSDR
Topic: Trouble connecting the RPi3 to the KSDR
Replies: 17
Views: 1616

Re: Trouble connecting the RPi3 to the KSDR

Sounds to me like you have decent power.

Just to confirm.
  • Start the Kerberos/plug it in
    Connect Kerberos to Pi
    Wait - I usually give it 1-2 min
    Power up the pi
    Wait - I'll give another 2-3 min
    Check lights on the Kerberos - blue lights should be lit
by Corrosive
Wed Mar 27, 2019 3:18 am
Forum: RTL-SDR Discussion
Topic: USA-Satcom contact
Replies: 4
Views: 762

Re: USA-Satcom contact

Learjet wrote:
Tue Mar 19, 2019 1:18 pm
What if we don't have a twitter account?
Your best bet is to just create an account
by Corrosive
Wed Mar 27, 2019 2:51 am
Forum: KerberosSDR
Topic: Trouble connecting the RPi3 to the KSDR
Replies: 17
Views: 1616

Re: Trouble connecting the RPi3 to the KSDR

How are you powering the kerberos?

How much current can the source supply?

My assumption based on what you mentioned so far suggest to me that your source is not supplying enough current.

I run mine with a source no lower than 2.1 amps without trouble but generally I try to use a 4-amp source.
by Corrosive
Sat Mar 23, 2019 1:41 am
Forum: KerberosSDR
Topic: RDF Compass Issue
Replies: 1
Views: 368

RDF Compass Issue

First off let me thank you for creating such a awesome project. I have everything installed and done the calibration, I'm using a new Raspberry pi 3 b+ I set my frequency etc. I go to the DOA estimation on the web UI and I can see clearly at my signal is being captured from each of the four receiver...
by Corrosive
Thu Feb 21, 2019 1:37 pm
Forum: RTL-SDR Discussion
Topic: RTL-SDR V3 with SDR-Console
Replies: 9
Views: 2145

Re: RTL-SDR V3 with SDR-Console

You shouldn't need a dll (like an extIO) for that, what you need to do is setup a definition so SDRConsole can see your RTL.

I did a brief tutorial on it some time ago. https://www.youtube.com/watch?v=C7F0GPf ... dBOUi&t=0s
by Corrosive
Tue Feb 05, 2019 7:45 pm
Forum: Troubleshooting Help
Topic: SDR# no boot.
Replies: 3
Views: 12091

Re: SDR# no boot.

Can you provide more details?

Do you get any errors or messages that pop up? Does the SDR# software just not open at all or is it not detecting?
Post a screenshot if you can.
by Corrosive
Tue Feb 05, 2019 7:42 pm
Forum: RTL-SDR Discussion
Topic: Multipsk not seeing my rtl-sdr dongle, why?
Replies: 2
Views: 11830

Re: Multipsk not seeing my rtl-sdr dongle, why?

Open the properties for your windows sound devices under the virtual audio cable you are using.
You should have an option to monitor/listen to that device without using any kind of repeater functionality.

Image
by Corrosive
Tue Feb 05, 2019 7:39 pm
Forum: Troubleshooting Help
Topic: RTL1090 ADS-B
Replies: 2
Views: 10543

Re: RTL1090 ADS-B

Your SDR should support ADS-B just fine, I have a feeling it's an issue with software.
Try this https://rtl1090.com/
by Corrosive
Fri Feb 01, 2019 7:40 pm
Forum: Other SDR Devices
Topic: Recieve 2.4 & 5.8G Drone camera-video with Portapack
Replies: 3
Views: 13386

Re: Recieve 2.4 & 5.8G Drone camera-video with Portapack

I wouldn't expect the HackRF to be capable with the portapack.. The hardware just isnt going to do it. However you might be able to in SDRAngel using the ATV demodulator. I've not tried it but if your camera is analog that might work, ofc if that's the case a 2.4 ghz baby monitor would also do the t...
by Corrosive
Fri Feb 01, 2019 7:34 pm
Forum: Troubleshooting Help
Topic: SDR shows up with two bulk-in interfaces
Replies: 5
Views: 15491

Re: SDR shows up with two bulk-in interfaces

I wish I had a solution for that... The tablet in my car is Windows 10 and I have 3 SDRs attached to it.
For some reason after an update I one of them showing up with double the interfaces. This only happens with one of the three which is even more strange.