Search found 94 matches

by ckoval7
Thu Dec 03, 2020 8:07 pm
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

I just got back and can confirm that a git clone of the original KerberosSDr software does display the compass page after being started. If I go checkout either the qt4 or qt5 branch of your version the compass page is not displayed. I think maybe this was part of my problem? Maybe not. I should’ve...
by ckoval7
Thu Dec 03, 2020 2:47 pm
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

Today’s the day. I’m checking out the transmitter location now. I’m most likely going to use the 106.5 tower. I’ll have the antenna height and spacing as close to what it should be as possible. What do you suggest cluster settings and such to be set at? The cluster settings vary depending on a lot ...
by ckoval7
Wed Dec 02, 2020 9:24 pm
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

Still working it, but I've got the following in the python log on the second system File "_GUI/hydra_main_window.py", line 764, in DOA_plot self.wr_xml(str(int(DOA)), str(int(confidence_sum)), str(np.maximum(0, max_$ File "_GUI/hydra_main_window.py", line 783, in wr_xml latitude, longitude = packet...
by ckoval7
Wed Dec 02, 2020 2:50 am
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

I’ve posted and deleted a few times now, sorry. It didn’t seem as though the icon was appearing on the map with gpsd, but that appears to work now. What I am noticing is that the icon doesn’t move unless I manually hit refresh. Is this because I’m not moving very far or because there’s only one Ker...
by ckoval7
Tue Dec 01, 2020 4:35 pm
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

From the terminal you started the program from you'll see "Receiver Paused."

A refresh of the WebUI will show the "Enable Receiver" switch turned off. Turning that back on will get things moving again.
by ckoval7
Tue Dec 01, 2020 12:56 pm
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

This thru I’ll have 3 drivers with 3 KerberosSDr units mobile with gps. They’ll all be remotely accessed via the df-aggrator server. I’ll most likely have to df a radio station with a large circular array. I also plan to have RDFMapper running as well to see the lobs. Each person will also have the...
by ckoval7
Fri Nov 27, 2020 7:42 pm
Forum: KerberosSDR
Topic: Running KSDR with SSH
Replies: 4
Views: 1340

Re: Running KSDR with SSH

Have you used the web interface to interact with the software? If you're on the same LAN as the KSDR you can browse to http://YourPiIP:8080, which will provide the same level of control as the desktop interface. If you're accessing the pi through a VPN you'll need to change the IP address in run.sh....
by ckoval7
Thu Nov 26, 2020 5:19 pm
Forum: KerberosSDR
Topic: Running KSDR with SSH
Replies: 4
Views: 1340

Re: Running KSDR with SSH

Is there a reason you're not using the pre-built pi image that already runs the KSDR software on start up? That would be the easiest solution. The next best thing to do would be to create the file /etc/xdg/autostart/kerberos.desktop with the contents: [Desktop Entry] Type=Application Name=Kerberos N...
by ckoval7
Wed Nov 25, 2020 7:47 pm
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

dinger wrote:
Wed Nov 25, 2020 4:07 am
This is prob a noob question, but can this be done with two units or do you need at least 3?
It can work well with two if the target isn't too far away.
by ckoval7
Mon Nov 23, 2020 8:11 pm
Forum: KerberosSDR
Topic: New Networked DFing software
Replies: 35
Views: 8528

Re: New Networked DFing software

Minus the gpsd connection, I have it up and running with one KerberosSDr. I’m running your extended 20.04 based software on a laptop with the IP manually set in the .run sh file. I have a cesium token and your software running on the same laptop port 8083. A connection is made with the KerberosSDr ...