outernet L band

[abt552]

Hello,

i have bought the full outernet pack to receive L band,with immarsat ,i want to receive
acars l band,and other messages in this band.
Which software is the better to receive all the trafic, jaero,or other software.
Please help me to run this material.
Thanks for your help
léon

[rtlsdrblog]

JAERO is the only AERO decoder I know of at the moment. Remember that for position reports you'll need to receive the C-band (requires a large dish). L-band ACARS is the uplink portion.

[abt552]

Thanks for your answer,
But without positions reports,I can receive many messages and also
Other things like maritime messages ,do you think it's better to use sdrsharp,
For that,outernet has a software In thé pack,ready to use,what do
You think about that?
Thanks for advance
Léon

[rtlsdrblog]

For JAERO you'll need to use something like SDR# to pipe the audio to it. For Inmarsat martime messages its the same process as JAERO, but use the Inmsarsat decoder instead. SDR# is probably the easiest one to use for piping audio.

The Outernet software can only receive the Outernet Signal at the moment.

[abt552]

Hello,
Thanks for your answer, I understand better,
I Wait for this "toy" and after that,I ask to you an other help.
Best regards
Léon

[Username]

Does anyone use outernet here?
I could not receive anything. I got the Set with the smal Pc. The LNA light light up.

[rtlsdrblog]

I have one set up and running.

My advice is to try and see if you can find the Outernet or at least other Inmarsat/Alphasat L-Band signals in SDR# first. The antenna should be used outside as often even a window will attenuate too much.

[Username]

The Antenna is ouitside with the LNA.

[rtlsdrblog]

The Antenna is ouitside with the LNA.

Do you see anything in SDR#?

[Username]

The "original" Dongle dont power the LNA in SDR# i dont know why. When he is connected to the Mini Pc than he power the LNA to.