Main forum to discuss RTL-SDR related topics.
- Posts: 1
- Joined: Wed May 16, 2018 5:35 pm
How do I get out of the direct sampling Q branch,so I can monitor other bands. Thanks Skipp
- Posts: 26
- Joined: Sat Apr 14, 2018 9:05 pm
If you are using SDR#, click on the configure source gear at the top and change your sampling mode.
- Posts: 101
- Joined: Sat Jan 14, 2017 11:07 pm
If using rtl_tcp, you can send a 5 byte command sequence to the open tcp/ip port, with 9 in the first byte, and zeros in the following 4 bytes to disable Q-branch direct sampling.