RTL-SDR V3 Range Works

Main forum to discuss RTL-SDR related topics.
Post Reply
D28
Posts: 2
Joined: Tue Aug 28, 2018 5:38 pm

RTL-SDR V3 Range Works

Post by D28 » Tue Aug 28, 2018 5:53 pm

Hello!! I'm newest here, so hi!!

I' m from Spain and my English is not a lot off, sorry.

https://www.rtl-sdr.com/buy-rtl-sdr-dvb-t-dongles/

What is the Range of work for this Dongle? I see in specification 24Mhz To 500kHz (or around, I no remember).

In any case. Can I work (search) in 432Mhz with this dongle an a dipole Yagui Uda antenna with the specific lenght dimension?

Thank you!!

rtlsdrblog
Site Admin
Posts: 2432
Joined: Mon Nov 19, 2012 11:54 pm

Re: RTL-SDR V3 Range Works

Post by rtlsdrblog » Wed Aug 29, 2018 4:47 am

Hello, the range is from 500 kHz to 1.7 GHz, so yes you can receive 432 MHz. Using a Yagi antenna would be fine.

D28
Posts: 2
Joined: Tue Aug 28, 2018 5:38 pm

Re: RTL-SDR V3 Range Works

Post by D28 » Wed Aug 29, 2018 7:44 pm

Thank you very much.

Im interest on this Dongle for the MSA (or SMA?) conector, because I use for telemetri for Falconry and actually I have an Noeelec and the connector sistem is some unstable and make noise.
Regards.

rtlsdrblog
Site Admin
Posts: 2432
Joined: Mon Nov 19, 2012 11:54 pm

Re: RTL-SDR V3 Range Works

Post by rtlsdrblog » Thu Aug 30, 2018 5:27 am

Yep one of the good things about the V3 is that it uses an SMA connector, which is much more common.

P-40 Warhawk
Posts: 86
Joined: Thu Jun 26, 2014 11:55 pm

Re: RTL-SDR V3 Range Works

Post by P-40 Warhawk » Fri Aug 31, 2018 11:56 am

A disk cone antenna works good also , just make sure you get one that has a " N " connector on it .

Post Reply