RTL-SDR Power script

Main forum to discuss RTL-SDR related topics.
Post Reply
Posts: 1
Joined: Wed Apr 10, 2019 2:20 pm

RTL-SDR Power script

Post by 25141928 » Wed Apr 10, 2019 2:28 pm

Hi guys I am after some help with RTLSDR_Power.

What I want to achieve:

I want to create a script that will scan a frequency range from say 25 to 26 MHz and report back the average power across that bandwidth using a python script attached to RTLSDR_Power.

I then want to monitor that power value and when a signal becomes present (increasing the power value (or reduces closer to 0)) a python script initiates a GNU radio record flowgraph.

Now the second part is clearly for another forum and I am working on that (feel free to advise if you know anything). I have seen the example in the RTL help but thats not in python!

Can anyone help me with this or suggest a resource that would help.



Post Reply