ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Main forum to discuss RTL-SDR related topics.
19ac728
Posts: 7
Joined: Thu Dec 31, 2015 8:55 am

Re: ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Post by 19ac728 » Mon Jul 08, 2019 7:32 pm

Thanks a lot again.
No problems found so far !

TarLink
Posts: 6
Joined: Thu Jul 18, 2019 8:05 pm

Re: ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Post by TarLink » Sat Jul 20, 2019 12:23 pm

Hello ! Thank you very much for your work ! Very convenient to use this driver ExtIO_RTLSDR_u8.dll with the program HDSDR , there is no need to manually switch Direct Sammpling ! Prompt , and there is no opportunity to use this driver with SDR# ?

TarLink
Posts: 6
Joined: Thu Jul 18, 2019 8:05 pm

Re: ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Post by TarLink » Sat Jul 20, 2019 8:48 pm

Tried with the guys to use ExtIO_RTLSDR_u8.dll with SDR# and it works but unfortunately only on very old version #. Of the minuses , this is what the program does not remember the driver settings and each time starts with the default settings ! I'd like to get hold of the opportunity to use ExtIO_RTLSDR_u8.dll and SDR# with a fresh version...

Image

TarLink
Posts: 6
Joined: Thu Jul 18, 2019 8:05 pm

Re: ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Post by TarLink » Tue Jul 23, 2019 10:13 pm

qrp wrote:
Wed Jul 03, 2019 4:33 am
A little update v1.1.1.6:
- added "Auto Q" direct sampling mode (automatic direct sampling enable when LO < 24086500)

When "Auto Q" is enabled, there is no need to select "Disabled" or "Q input" manually, it will be switched automatically. :)
This version includes rtlsdr.dll with static linked libraries, so it don't require to install other libraries.
And one more question ! And is it possible to do this with the driver for SDR # ? I use RTLSDR V3 and it is not convenient to switch direct sampling every time when to switch from VHF to HF. Sorry in advance for the stupid questions and my English, I do not understand much about it!

qrp
Posts: 23
Joined: Wed May 22, 2019 11:16 pm

Re: ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Post by qrp » Mon Aug 05, 2019 6:55 pm

TarLink wrote:
Tue Jul 23, 2019 10:13 pm
And one more question ! And is it possible to do this with the driver for SDR # ?
This is just ExtIO plugin. It should works with any software which uses ExtIO.
I don't using SDR#, but I will try to find the latest version and check it.

qrp
Posts: 23
Joined: Wed May 22, 2019 11:16 pm

Re: ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Post by qrp » Mon Aug 05, 2019 7:12 pm

A small update ExtIO_RTLSDR# v1.1.1.7:
- fixed dialog modality issue for setting window (previously it blocked overlapping dialogs of the application)
- added check for supported frequencies (now attempt to set unsupported frequency will lead to cancel and revert back to previous valid frequency)
Attachments
ExtIO_RTLSDR_u8-1.1.1.7.zip
ExtIO_RTLSDR# v1.1.1.7
(132.33 KiB) Downloaded 259 times
ExtIO_RTLSDR_u8_1117.png
ExtIO_RTLSDR# screenshot
ExtIO_RTLSDR_u8_1117.png (18.08 KiB) Viewed 2046 times

Sadboi
Posts: 5
Joined: Wed Jul 24, 2019 11:43 pm

Re: ExtIO_RTLSDR# - custom ExtIO for RTLSDR

Post by Sadboi » Fri Aug 23, 2019 10:47 pm

Hi there! :)

I had some issues running this piece of software https://github.com/martinmarinov/TempestSDR on machines where both java64 and java32 are present. I have been looking for a 64 bit ExtIO for testing.

I saw that you wrote that if needed you could compile one (6bit ExtIO_RTLSDR#).

Could you please? :D


Thank you ;)

Post Reply