SDR# issues

Main forum to discuss RTL-SDR related topics.
Posts: 71
Joined: Wed May 22, 2019 11:16 pm

Re: SDR# issues

Post by qrp » Sun Aug 18, 2019 5:37 pm

Does HDSDR works ok?

Posts: 7
Joined: Thu Aug 15, 2019 6:55 pm

Re: SDR# issues

Post by wpa2 » Sun Aug 18, 2019 7:38 pm

qrp wrote:
Sun Aug 18, 2019 5:37 pm
Does HDSDR works ok?
Just installed it now and runs fine.

Posts: 7
Joined: Thu Aug 15, 2019 6:55 pm

Re: SDR# issues

Post by wpa2 » Sat Apr 18, 2020 6:33 pm

Still having issues with this does any body have any ideas at all ?
Every other rtlsdr program i have tried works flawless just not sdr#

Code: Select all

Faulting module name: libusb-1.0.dll, version:, time stamp: 0x55f62318

Posts: 613
Joined: Sun Oct 09, 2016 7:27 am

Re: SDR# issues

Post by Username » Sun Apr 19, 2020 11:30 am

Which Zadig Version?
Anti Virus?
Which SDR?

Posts: 1
Joined: Wed Nov 25, 2020 6:30 pm

Re: SDR# issues

Post by hamguy » Wed Nov 25, 2020 6:40 pm

I'm seeing the same hanginging on a 4 GB windows 10 machine. It happens repeatably whenever I change either audio output or sampling mode. After I force it to quit, I change either audio out or sampling mode again and this time the change is made without hanging.

The Windows event log for Application has this error detail:
Faulting application name: SDRSharp.exe, version:, time stamp: 0x5fb1bee5
Faulting module name: ntdll.dll, version: 10.0.18362.387, time stamp: 0xa4208572
Exception code: 0xc0000005
Fault offset: 0x00063cb3
Faulting process id: 0x27c
Faulting application start time: 0x01d6c3348af373f7
Faulting application path: C:\Data\HAMRadio\Hardware\RTL-SDR\SdrSharp2020-11-16\SDRSharp.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: a37172d4-abd0-49c5-b0ef-679dc90516be
Faulting package full name:
Faulting package-relative application ID:

Searching the "exception code value", microsoft says the most common cause is that the application is throwing a null reference exception. Dot Net has no protection against this, and those exceptions can be trickey to find. Since the problem is repeatable, it can be done relatively easily. Please post when the problem is found and fixed.

Thank you, hamguy

Posts: 201
Joined: Thu Oct 04, 2018 11:18 am

Re: SDR# issues

Post by alanzfq » Thu Nov 26, 2020 7:53 am

You could try v1784
If you watch the Airspy group you may have seen an answer, I made no notes but there have been a few updates recently, not every one immediately successful.
I usually wait a few weeks until things have been proven.

Posts: 11
Joined: Sat Nov 28, 2020 1:41 pm

Re: SDR# issues

Post by mrtomato » Sat Nov 28, 2020 1:53 pm

Same here. Tested on two computers. Core 2 Duo, 4GB RAM and i7, 32GB RAM. On weaker computer any receive disable gives hangs and often crashes, but also other computer does same specially when audio is routed to virtual cable to use it with DDS plugin. Then all computeters gets SDR# crash. I installed even latest version and problem is the same. But latest version have stupid płacimy all plugins in very uncomfortable position and I not even know how set this to old position. I also tested dongle on MacBook Air Early 2015 with OSX programs, works OK and all Windows laptops with other SDR apps.

Post Reply