Newbie needing help ?

Main forum to discuss RTL-SDR related topics.
Post Reply
Gorby928
Posts: 2
Joined: Fri Jun 20, 2014 5:50 pm

Newbie needing help ?

Post by Gorby928 » Fri Jun 20, 2014 6:00 pm

Hi all
Well I have ordered and recieved my RTL TV stick and I wish to install a SDR package.I am running a Linux OS flavour of Ubuntu based on 12.04 LTS 64bit version.Now I use linux but I rarely go into the terminal unless i have to (grab video etc).I could really do with help on choosing the right SDR package and then a pointer to a easy step by step installation guide.Thanks in advance.

rtlsdrblog
Site Admin
Posts: 2281
Joined: Mon Nov 19, 2012 11:54 pm

Re: Newbie needing help ?

Post by rtlsdrblog » Mon Jun 23, 2014 12:35 am

For a beginner on Linux i'd recommend GQRX, which is a standard SDR GUI https://github.com/csete/gqrx (git install instructions are on that page too). I wouldn't bother with GNU Radio unless you are looking to do some serious signal processing work.

As for Linux driver installation the instructions are on the official rtl-sdr page http://sdr.osmocom.org/trac/wiki/rtl-sdr.

1337g
Posts: 2
Joined: Thu Jul 10, 2014 3:24 am

Re: Newbie needing help ?

Post by 1337g » Thu Jul 10, 2014 4:07 am

This is what I did, in case it helps:

1. Installed rtlsdr from source (installed cmake first with apt-get install cmake) http://sdr.osmocom.org/trac/wiki/rtl-sdr#rtl_sdr

2. Installed pyrtlsdr (https://github.com/roger-/pyrtlsdr) (git clone .......)

apt-get install python-pip
pip install pyserial

3. Install Kalibrate-SDR:
apt-get install libtool autoconf automake libfftw3-dev
git clone https://github.com/asdil12/kalibrate-rtl.git
cd kalibrate-rtlgit
./bootstrap
./configuremakesudo make install
(http://www.kubonweb.de/?tag=rtl-sdr)

Run:
kal -s 850 (or 900, depending on which country you live, check your GSM band)
then: kal -c <strongest channel from above output>
Note down the offset
(http://rtl-sdr.sceners.org/?p=193)

Make sure everything works:
rtl_test -t

Should tell you your stick model etc.

You may need to remove the kernel module if it complains about not being able to lock the device:
sudo rmmod dvb_usb_rtl28xxu

Post Reply