serial over RF monitor

Talk about anything else here.
Post Reply
I_Need_help
Posts: 2
Joined: Tue Oct 10, 2017 9:34 pm

serial over RF monitor

Post by I_Need_help » Tue Oct 10, 2017 9:44 pm

Hi All,
If I have a local RF source transmitting Serial data @ 38.4K Baud can i decode what it is being transmitted using RTL-SDR software?

i know what is being transmitted and the frequency as it in a test system but look to see if i can use the software to act as a monitor...

if so how would i configure the software?

thanks
Top
Username
Posts: 549
Joined: Sun Oct 09, 2016 7:27 am

Re: serial over RF monitor

Post by Username » Sun Oct 29, 2017 12:26 pm

You need an SDR and SDR#. The main problem is a Software who allow you to decode the Data.
Do you know all parameter of the data?
Top
I_Need_help
Posts: 2
Joined: Tue Oct 10, 2017 9:34 pm

Re: serial over RF monitor

Post by I_Need_help » Sat Nov 04, 2017 9:03 pm

The baud rate is 34.8k 8 1 n
Frequency is 869.5Mhz
Top
Username
Posts: 549
Joined: Sun Oct 09, 2016 7:27 am

Re: serial over RF monitor

Post by Username » Sun Nov 05, 2017 2:26 pm

Try GNU Radio.
Top
rtlsdrblog
Site Admin
Posts: 2509
Joined: Mon Nov 19, 2012 11:54 pm

Re: serial over RF monitor

Post by rtlsdrblog » Mon Nov 06, 2017 12:29 am

What's the modulation? Maybe MultiPSK or flidigi etc have the mode there already.
Top
Post Reply

Return to “Off-Topic”