Page 1 of 1

LNA protection from weather

Posted: Fri Jan 25, 2019 3:57 am
by ZL2BMH
Hello All.

I have just bought a well-known brand, LNA. It says that it is to be strapped to the pole, just under the aerial. and to be water-proofed as the main components are inside an aluminium casing.

I was wondering what you do to keep something like this water-proofed?

Regards and thanks for any answers

Jim.

Re: LNA protection from weather

Posted: Fri Jan 25, 2019 1:45 pm
by rtlsdrblog
Depending on the size, i'd look for a junction box with waterproof cable clamps e.g. a small one: https://www.aliexpress.com/item/2018-Ne ... 130299d02f.

Maybe even spray a bit of conformal coating on the PCB.

Re: LNA protection from weather

Posted: Wed Feb 27, 2019 6:55 pm
by Typhoon_MkII
I remember that on one of my first installations, I did the waterproofing in the good ol' gipsy custom way, with a plastic bag held by electrical tape :lol: of course, you shouldn't do that, it's better to do it professionally with appropriate kit as described by rtlsdrblog.