No Audio from HDSDR

Need help installing or figuring out something about your SDR? Ask here.
Post Reply
ThuntDon
Posts: 2
Joined: Thu Dec 14, 2017 6:29 am

No Audio from HDSDR

Post by ThuntDon » Thu Dec 14, 2017 6:45 am

No audio from my computer!
I've had audio in the past. I am using HDSDR with a RSP2, Windows 10 computer. I also can use SDRUno with the RSP2 and the audio is fine. I've made several attempts to re-downloading HDSDR with latest ExtIO for HDSDR. I get spectrum, and all functions seem to be working okay, only no actual audio is heard. Audio gain is turned up, squelch is set low. What am I doing wrong?
Thanks, Don

rtlsdrblog
Site Admin
Posts: 2273
Joined: Mon Nov 19, 2012 11:54 pm

Re: No Audio from HDSDR

Post by rtlsdrblog » Thu Dec 14, 2017 7:57 am

Double checked your Windows system volumes?

Perhaps upload a screenshot of HDSDR and I can check your settings.

ThuntDon
Posts: 2
Joined: Thu Dec 14, 2017 6:29 am

Re: No Audio from HDSDR

Post by ThuntDon » Thu Dec 21, 2017 1:46 am

Thanks for the reply,
I've been away for sometime, but after thinking about my problem, After getting back, I found that I had downloaded a Virtual Audio device and the HDSDR was set to that, and so no audio! All it took was to reset the HDSDR to normal sound card.
Don

ktob
Posts: 1
Joined: Sun Nov 04, 2018 2:18 am

Re: No Audio from HDSDR

Post by ktob » Sun Nov 04, 2018 2:49 am

I had the same problem everything was working then it was not. I found the slider bar located under the frequency (tune) button and above the sound recorder functions. Mine was set all the way lect which turned off the audio. I slidmit right and everything worked. Hope this helps 73

Post Reply