CAN NOT OPEN AIRSPY DEVICE

Need help installing or figuring out something about your SDR? Ask here.
Post Reply
PapyOsullivan
Posts: 1
Joined: Sun Jul 22, 2018 9:35 am

CAN NOT OPEN AIRSPY DEVICE

Post by PapyOsullivan » Sun Jul 22, 2018 10:13 am

Hi

I have a dongle EDAL RTL2832U + USB FC0012 DVB-T MPEG4 / H.264 HDTV.

I configured Zagid with WinUSB (v6.1.7600.16385)
libwdi:debug [wdi_create_list] Device description: 'Bulk-In, Interface (Interface 0)'
libwdi:debug [wdi_create_list] Hardware ID: USB\VID_046D&PID_C52F&REV_3000&MI_01
libwdi:debug [wdi_create_list] Compatible ID: USB\Class_03&SubClass_00&Prot_00
libwdi:debug [wdi_create_list] Driver version: 10.0.16299.492
libwdi:debug [wdi_create_list] HidUsb USB device (5): USB\VID_046D&PID_C52F&MI_01\6&22D67F6E&1&0001

libwdi:debug [wdi_create_list] Device description: 'Bulk-In, Interface (Interface 1)'
6 devices found.
libwdi:debug [wdi_create_list] Hardware ID: USB\VID_0BDA&PID_57BC&REV_0002&MI_00
libwdi:debug [wdi_create_list] Compatible ID: USB\Class_0e&SubClass_03&Prot_00
libwdi:debug [wdi_create_list] Driver version: 6.1.7600.16385
libwdi:debug [wdi_create_list] WinUSB USB device (0): USB\VID_0BDA&PID_57BC&MI_00\6&3A3F5879&0&0000
SDRSharp.exe works RTL-SDR USB Source and everything goes well!

When I test ADSBSpy, AirspyCalibrate, AstroSpy and SpectrumSpy it gives a message CAN NOT OPEN AIRSPY DEVICE

what does not work

thank you

Remon
Posts: 47
Joined: Fri Jun 22, 2018 2:49 am

Re: CAN NOT OPEN AIRSPY DEVICE

Post by Remon » Sun Jul 22, 2018 2:43 pm

It's simply because you don't have an Airspy device.

rtlsdrblog
Site Admin
Posts: 2283
Joined: Mon Nov 19, 2012 11:54 pm

Re: CAN NOT OPEN AIRSPY DEVICE

Post by rtlsdrblog » Mon Jul 23, 2018 2:56 am

Yes those programs are only for Airspy devices. Only SDR# works with RTL-SDR dongles.

Post Reply