Orbitron and Schedular Plugin - can't track multiple satellites

Need help installing or figuring out something about your SDR? Ask here.
Post Reply
jokn999
Posts: 1
Joined: Sat Oct 27, 2018 9:17 pm

Orbitron and Schedular Plugin - can't track multiple satellites

Post by jokn999 » Sat Oct 27, 2018 9:38 pm

Hello there!

I'm using Orbitron as a doppler-effect calculator and SDR# with a schedular plugin as receiver, like this tutorial describes: https://www.rtl-sdr.com/wp-content/uplo ... altime.pdf
I want to receive the Meteor-M N2 satellite as well as 3 NOAA satellites, but fully automated. The final goal would be to go to a website and see the latest images.

But here is my question:
As I connect Orbitron to SDR# using the DDE driver, I can only select one satellite at a time in the Rotor/Radio category, for instance, the NOAA 19. Now if NOAA 18 passes by, the schedular plugin doesn't change the frequency of SDR#, because Orbitron isn't giving any commands at all.

Is it somehow possible to make Orbitron switch between the chosen satellites, if an AOS happens?

Don't get me wrong, if the satellite I want to receive is chosen, it works perfectly fine.

I'm really looking forward to an answer, thank you in advance.
Johannes
Attachments
sdr#.PNG
sdr#.PNG (1.35 MiB) Viewed 3172 times
orbitron.PNG
orbitron.PNG (480.64 KiB) Viewed 3172 times

paultyrer
Posts: 1
Joined: Sun Jun 23, 2019 12:41 pm

Re: Orbitron and Schedular Plugin - can't track multiple satellites

Post by paultyrer » Sun Jun 23, 2019 12:42 pm

Did you find a solution to this. I have the exact same issues. With the same satellites.

What was the problem?


Thanks

Paul

Post Reply