Page 1 of 1

Orbitron and Schedular Plugin - can't track multiple satellites

Posted: Sat Oct 27, 2018 9:38 pm
by jokn999
Hello there!

I'm using Orbitron as a doppler-effect calculator and SDR# with a schedular plugin as receiver, like this tutorial describes: https://www.rtl-sdr.com/wp-content/uplo ... altime.pdf
I want to receive the Meteor-M N2 satellite as well as 3 NOAA satellites, but fully automated. The final goal would be to go to a website and see the latest images.

But here is my question:
As I connect Orbitron to SDR# using the DDE driver, I can only select one satellite at a time in the Rotor/Radio category, for instance, the NOAA 19. Now if NOAA 18 passes by, the schedular plugin doesn't change the frequency of SDR#, because Orbitron isn't giving any commands at all.

Is it somehow possible to make Orbitron switch between the chosen satellites, if an AOS happens?

Don't get me wrong, if the satellite I want to receive is chosen, it works perfectly fine.

I'm really looking forward to an answer, thank you in advance.
Johannes