Need help installing or figuring out something about your SDR? Ask here.
Post Reply
Posts: 1
Joined: Sun Mar 31, 2019 10:41 pm


Post by W2UV » Sun Mar 31, 2019 11:11 pm

Well after three hours of rifling the settings menu the device remains DEAF there are plenty of signals to be seen in the WF and tuning displays but no audio other than a static hiss.The audio settings in the audio drop down are grayed out and set to microsoft audio codec; they need to be changed to the rtl sdr for the input and realtek HD audio for the output I think. Also the RF gain is grayed out tried enabling /un enabling both AGC tabs no luck there either. Computer is an ACER V3-331 with 18Gb memory, 1.7Ghz pentium 3556U, and OS Win 10 Home.Thanks in advance .73

Site Admin
Posts: 2816
Joined: Mon Nov 19, 2012 11:54 pm

Re: RTL-SDR V3 Deaf

Post by rtlsdrblog » Mon Apr 01, 2019 11:33 am

Did you select the correct MODE for the signals you are tuned to? And have you clicked on the signal to tune to it?

Please upload a screenshot so I can check your settings.

Post Reply