Sharp has no devices

Need help installing or figuring out something about your SDR? Ask here.
jcc70
Posts: 12
Joined: Sat Apr 07, 2018 9:41 am

Re: Sharp has no devices

Post by jcc70 » Wed Apr 18, 2018 12:42 pm

Jen wrote:
Tue Apr 17, 2018 12:03 am
SDR dongles do not work with USB 3. Try an older USB port.....
So SDR dongles don't work with USB 3, all SDR dongles ?, for the RTL-SDR dongle it is not mention in the data sheet.

rtlsdrblog
Site Admin
Posts: 2432
Joined: Mon Nov 19, 2012 11:54 pm

Re: Sharp has no devices

Post by rtlsdrblog » Wed Apr 18, 2018 12:54 pm

The RTL-SDR works just fine on USB 3.0.

However, some early USB3.0 controllers were very buggy and don't always work well with USB2.0 devices. This is where you might run into trouble.

Hicham-BELMEJOUL
Posts: 1
Joined: Sun Jul 07, 2019 2:08 pm

Re: Sharp has no devices

Post by Hicham-BELMEJOUL » Sun Jul 07, 2019 2:12 pm

You can try this solution :
1. follow procedure for install driver (zadig)
2. Unzip sharp folder
3. click on "install-rtlsdr.exe" (open firewall if necessary)
4. ok, the dongle work correctly

If i don't execute "install-rtlsdr.exe", Sharp indicate "Device not found or not connected" i have the same problem.

regards,
Hicham

Post Reply