Page 1 of 1

need help with meteor

Posted: Mon Jul 13, 2020 3:06 am
by weathersatelite
i am getting no signal. but i get a signal with NOAA.
i have the live demodulator in sdr#. i have the latest lrpt decoder.
2 passes saw nothing.
using a dipole indoor.

for NOAA to come in i usually need 30+ degrees.
could that be my problem?
they we 30 degree passes.

Re: need help with meteor

Posted: Tue Jul 14, 2020 3:06 pm
by weathersatelite
it half worked. i saw a strong signal. plugin showed a lock. but new lrptofflince decoder did not start to decode it. why and help please.

Re: need help with meteor

Posted: Tue Jul 14, 2020 3:43 pm
by weathersatelite
does it matter if i launch the decoder or sdr# with the plugin first. i cant remember which way it was could not find anything

Re: need help with meteor

Posted: Tue Jul 14, 2020 7:46 pm
by weathersatelite
it was actuly the 2014 version for decode.

Re: need help with meteor

Posted: Tue Jul 14, 2020 8:27 pm
by tim_rtd
Start SDR# .... 137.1 Mhz .....100K passband WFM
goto Meteor plugin and enable
Select TCP
Open \LRPT_Decoder_v56\ run.bat QPSK mode 7200 symb rate ....from HappySat...
Meteor plugin should show 1 connection.
When a "good" signal is being rcv'ed ...the blue Amigo /LRPT_decoder window will expand into 5 or 6 black frames.
The major issue for me is that NOAA 19 and meteor shadow each other and freq overlaps reception.

Re: need help with meteor

Posted: Thu Jul 16, 2020 1:54 am
by weathersatelite
got i9t to work. had wrong version of decoder needed 2019 edition link in happy sat tutioal.