Page 1 of 1

Begginer question

Posted: Wed Dec 30, 2020 3:03 pm
by shaimaor
Hello,
This is the first time i been using RPI 4 and kerberosSDR and still its not working. I follow the guide but still cant find the wifi of Kerberospi. Should i attach antenas to the KerberosSDR before?
Another qustion about the pi, i need to do somthing on it except of burn the image into it? or all the connection to the wifi suppose to happen automaticaly?

Re: Begginer question

Posted: Thu Dec 31, 2020 1:25 am
by rtlsdrblog
What model of Pi 4 do you have? The higher RAM models seem to have a bug which make the SD Card unable to work.

COnnect a monitor to the Pi first to see what's happening if possible. You don't need the antennas connected for the Pi's WiFi to work.

Re: Begginer question

Posted: Wed Jan 27, 2021 12:37 pm
by shaimaor
Hey,
We've got the 4 GB RAM model. is it supposed to be good?
Thank you.

Re: Begginer question

Posted: Wed Jan 27, 2021 1:01 pm
by shaimaor
and if so, do you have any other idea why our SBC doesn't get the wifi signal? assuming everything was set up as described.

Re: Begginer question

Posted: Wed Feb 10, 2021 2:17 am
by rtlsdrblog
Are you brodcasting a wifi signal KerberosAndroid/KerberosAndroid ?

This is the only AP name it will automatically connect to. Otherwise if not detected it will instead create it's own WiFi hotspot called KerberosPi/KerberosPi which you can connect to.

If you want to connect to a custom AP you can edit /etc/wpa_supplicant/wpa_supplicant.conf

Re: Begginer question

Posted: Fri Feb 26, 2021 1:13 pm
by shaimaor
We did everything you mentioned. sorry about the delayed responses, we are both students and just finished finals.
i'm attaching a photo of our configuration. If you see any problem please let us know.

Image

Re: Begginer question

Posted: Fri Feb 26, 2021 1:57 pm
by shaimaor
In addition to that, we connected the above configuration to the screen, the booting process can be shown in the below picture. please notice the last error line. what does it mean? is this the problem? and what should we do?

Image