Find the direction of the 2.4GHz signal

Discuss KerberosSDR - 4x Coherent RTL-SDR
Post Reply
tunglam88
Posts: 2
Joined: Fri Jan 29, 2021 9:20 am

Find the direction of the 2.4GHz signal

Post by tunglam88 » Fri Jan 29, 2021 9:25 am

hello, i'm a beginner and i plan to buy KerberosSDR for research. Please help me, can KerberosSDR help me find the direction of the 2.4 GHz signal. If not, is there a way to do it? Thank you very much!

rtlsdrblog
Site Admin
Posts: 2881
Joined: Mon Nov 19, 2012 11:54 pm

Re: Find the direction of the 2.4GHz signal

Post by rtlsdrblog » Wed Feb 10, 2021 2:23 am

Unfortunately Kerberos is limited to the frequency range of a typical RTL-SDR which is up to 1.766 GHz. There are some driver hacks which *MIGHT* get you 2.4 GHz with some front end HPF filtering, but not had success with those tests yet.

tunglam88
Posts: 2
Joined: Fri Jan 29, 2021 9:20 am

Re: Find the direction of the 2.4GHz signal

Post by tunglam88 » Thu Feb 18, 2021 3:11 am

Thank you very much for the reply. Is there any way to use the 4 hardware hackrf one or bladerf for finding the radio direction of the 2.4 GHz signal?

rtlsdrblog
Site Admin
Posts: 2881
Joined: Mon Nov 19, 2012 11:54 pm

Re: Find the direction of the 2.4GHz signal

Post by rtlsdrblog » Fri Mar 05, 2021 4:25 am

For the HackRF look up the "OperaCake" project, that might help.

Post Reply