RTLSDR2832U IF bandwidth

[ARHasani]

Dear friends,
I'd like to know whether the bandwidth of the RF signal selected by the RTL-SDR tuner to be converted to IF band is fixed or adjustable? If it is fixed, how much is its value exactly?
Are the bandwidth values listed in the following page
https://www.rtl-sdr.com/about-rtl-sdr/
are the IF bandwidth of various SDRs?
And if it is, why it is only 3.2 MHz for R820T? The R820T tuner was primarily used for decoding DVB-T signals which have the bandwidth of 5-8 MHz. So 3.2 MHz is not big enough for that purpose.

[hotpaw2]

The 3.2 MHz bandwidth maximum seems to be a limitation of the RTL2832's back-end digital logic, not the front-end analog bandwidth or anything to do with the R820T.

[rtlsdrblog]

The tuner can do up to 10 MHz, have a look at the Airspy it's the same tuner.

But the RTL2832U chip can only do 3.2 MHz in IQ mode. The other mode uses internal demodulators for DVB-T TV, it's not the same as the IQ output mode.