KerberosSDR Developments in 2020

Discuss KerberosSDR - 4x Coherent RTL-SDR
Posts: 94
Joined: Fri Sep 27, 2019 8:54 pm

Re: KerberosSDR Developments in 2020

Post by ckoval7 » Mon Feb 01, 2021 12:36 am

markahan wrote:
Sun Jan 31, 2021 9:18 pm
ckoval7 wrote:
Fri Jan 22, 2021 3:15 am
If you're inclined to roll your own boards, this is the part I've used: ... A2-30DR%2B
If you would like to buy some, I'll be selling them through Tindie in a couple weeks. I've got most of what I need to make a significant number of these, just waiting for a few more items to show up.
Fantastic - definitely interested in the finished product, so will keep an eye out for your tindie store when the time comes.
Do you have a link to your store?
I made a new thread for it here: viewtopic.php?f=9&t=6345
Direct link to Tindie: ... -ohm-load/

Posts: 5
Joined: Mon May 25, 2020 2:11 pm

KerberosSDR Developments in 2021

Post by NG-8 » Sun Feb 07, 2021 2:24 pm

Dear rtl-sdr Team,

I'm following your homepage since years and also enjoy your products; the dongle and the KerberosSDR. Could you please elaborate a bit on what you have planned in 2021 in terms of KerberosSDR hard- and software developments.
Would be nice to read an update.
Many thanks!
Best regards,

Site Admin
Posts: 2913
Joined: Mon Nov 19, 2012 11:54 pm

Re: KerberosSDR Developments in 2020

Post by rtlsdrblog » Wed Feb 10, 2021 2:37 am

Apologies for the lack of recent updates. We've been stalled for quite some time due to various reasons, but we're getting close to properly announcing new developments soon.


[*]V2 prototypes are finally getting close to completion. We note that V2 will be renamed to "KrakenSDR" and will be a 5-input board with built in automatic calibration switches,

[*] The new DAQ code is mostly ready. This allows for arbitrary buffer sizes, and better handling of intermittent signals. However it is NOT user friendly to use right now as all these parameters need to be tuned and edited in an ini file. Later we will release either a GUI or a set of preset ini files for different types of signals.

You can try it out and view the DAQ side code at on the development branch. Later we'll release the DOA code too. Please note we're not providing any support for this code right now.

Note that we are still dealing with a bug that seems to stop the DSP library from working on aarch64 systems.

[*] The passive radar developments will just be starting this year.

Site Admin
Posts: 2913
Joined: Mon Nov 19, 2012 11:54 pm

Re: KerberosSDR Developments in 2020

Post by rtlsdrblog » Fri Mar 05, 2021 4:35 am

DOA code for heimdall is uploaded now ... _interface

Please ignore the readme on this as it's for the old code. Slowly making progress on finalizing it for release and having proper install instructions.

We're going to focus on the web interface only from now on, rather than wasting time developing a web interface and QT GUI at the same time.

For people interested in the heimdall DAQ side, people should consult the documentation which is here ... umentation

Post Reply