Bulk in interface (Interface 1) gone but zadiq sees it

Main forum to discuss RTL-SDR related topics.
Post Reply
n3mmr
Posts: 5
Joined: Sat Jul 15, 2017 9:53 am

Bulk in interface (Interface 1) gone but zadiq sees it

Post by n3mmr » Sat Jul 15, 2017 10:24 am

I had some problems with sdr# and my rtl-sdr dongle, so I accidentally removed bulk in interface 1 when doing stuff in device manager.

Sdr# now works, but zadiq sees interface 1 and claims to see a driver there, named RTL2832U_IRHID (V8664.1.1019.2010).

Huh?

What should I do to make interface 1 reappear in w10 device manager, and is zadiq right or wrong about that driver, and is it something useful or not?

tim_rtd
Posts: 37
Joined: Fri Jun 30, 2017 11:34 am

Re: Bulk in interface (Interface 1) gone but zadiq sees it

Post by tim_rtd » Sat Jul 15, 2017 3:04 pm

I believe this to be the remote control that is not used when using this device as a radio.

rtlsdrblog
Site Admin
Posts: 1363
Joined: Mon Nov 19, 2012 11:54 pm

Re: Bulk in interface (Interface 1) gone but zadiq sees it

Post by rtlsdrblog » Mon Jul 17, 2017 7:07 am

Yes interface 1 is for the IR driver, but this is not used in SDR mode. So there is no need to install any drivers to this interface.

Post Reply