Signal caught. NoAA Reception

Main forum to discuss RTL-SDR related topics.
Post Reply
ea7tb
Posts: 3
Joined: Sat Mar 31, 2018 1:49 pm

Signal caught. NoAA Reception

Post by ea7tb » Sat Mar 31, 2018 2:30 pm

Hi.
I am trying to decode meteorological satellites.
Raspberry pi 3B, and rtl-sdr, everything seems to work fine but it gives me the following error "signal caught"
Any ideas?

system report
X-UID: 3

Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Tuner gain set to 44.50 dB.
Tuner error set to 55 ppm.
Tuned to 138392500 Hz.
Oversampling input by: 32x.
Oversampling output by: 1x.
Buffer size: 4.27ms
Sampling at 1920000 S/s.
Output at 60000 Hz.
Signal caught, exiting!
Signal caught, exiting!


User cancel, exiting...
sox WARN wav: Premature EOF on .wav input file
wxmap: warning: could not find matching pass to build overlay map.

rtlsdrblog
Site Admin
Posts: 2403
Joined: Mon Nov 19, 2012 11:54 pm

Re: Signal caught. NoAA Reception

Post by rtlsdrblog » Tue Apr 03, 2018 1:59 am

You didn't say what software you are using?

ea7tb
Posts: 3
Joined: Sat Mar 31, 2018 1:49 pm

Re: Signal caught. NoAA Reception

Post by ea7tb » Sun Oct 07, 2018 12:24 pm

Raspberry Raspbian, for RTL-SDR, for remote
Win 10 SharpSDR

rtlsdrblog
Site Admin
Posts: 2403
Joined: Mon Nov 19, 2012 11:54 pm

Re: Signal caught. NoAA Reception

Post by rtlsdrblog » Mon Oct 08, 2018 5:24 am

Looks like a problem with SOX. Paste the command you're using too.

tim_rtd
Posts: 96
Joined: Fri Jun 30, 2017 11:34 am

Re: Signal caught. NoAA Reception

Post by tim_rtd » Mon Oct 15, 2018 3:03 pm

Personally, I would use and do use rtl_tcp on raspberry. SDRShap rtl_tcp input.
Then virtual cable from sdrsharp to what every app...wxtoimg.....

Post Reply