Unitrunker not showing site

Need help installing or figuring out something about your SDR? Ask here.
Post Reply
Posts: 1
Joined: Wed Dec 05, 2018 3:17 am

Unitrunker not showing site

Post by rocketcoder » Wed Dec 05, 2018 3:24 am

Hi all. I'm relatively new to SDR. I bought two of R820T2's to try listening in on police and fire. I have the two SDRs working with SDR#. I followed the instructions for setting up Unitrunker and have the correct frequency for the control station. I can hear the constant noise of the station, but the site window is not coming up nor is the health indicator changing. Under the VCO tab the RSSI and Window keeps changing numbers as if it is doing something.

Here is where I got my frequency info from. The control slightly different than listed there.

Any ideas as to why it isn't working?

Posts: 1
Joined: Sat Mar 14, 2020 1:28 pm

Re: Unitrunker not showing site

Post by geremyel » Sat Mar 14, 2020 1:34 pm

Has anyone had any luck or ability to troubleshoot this?
I'm not sure what to do.
I have two rtl sdr dongles, but only of them with an antenna (I thought second one was just for bandwidth, but apparantly it needs an antenna also?).
Because of that, I tried to keep it simple to start and ran using one.
When I run frequencies that are active, the "site window" doesn't pop up like it does on the video I watch, and I follow step by step. I will get voice, but not everything. Some voice, but no channel dialog, no talk groups, nothing.
Can someone please help?

Post Reply