Best antenna for 1mhz-50 and 1khz - 800khz

Discuss commercial and home made antennas.
Post Reply
Eagle72
Posts: 5
Joined: Thu Jan 10, 2019 2:20 pm

Best antenna for 1mhz-50 and 1khz - 800khz

Post by Eagle72 » Sat Jan 12, 2019 10:18 pm

Hi.

Im very new on this field and trys to learn how radio signals works, my question is what is the best antenna to recieve 1mhz-50 and 1khz-800khz low freqvency...

Is it possible to spot signals from distance despite the low freqvencies?

rtlsdrblog
Site Admin
Posts: 1922
Joined: Mon Nov 19, 2012 11:54 pm

Re: Best antenna for 1mhz-50 and 1khz - 800khz

Post by rtlsdrblog » Sun Jan 13, 2019 12:08 am

There is no real 'best' antenna. It all depends on your location, what space you have available, local interference, the landscape, HF conditions etc.

Generally for HF signals, bigger antennas tuned for your band of interest are better. If you have space you can set up a wire dipole for HF. Google for HF dipole antennas etc. For VLF you could try a miniwhip which reportedly works well there. Alternatively if space is an issue look into wideband magnetic loop antennas too, like Wellbrooks.

Eagle72
Posts: 5
Joined: Thu Jan 10, 2019 2:20 pm

Re: Best antenna for 1mhz-50 and 1khz - 800khz

Post by Eagle72 » Sun Jan 13, 2019 2:20 am

I see what you mean and thanks very much for your ansver, actually i thought opposite smaller antenna for low freq.. Happy to be member of this forum.. cheers

rtlsdrblog
Site Admin
Posts: 1922
Joined: Mon Nov 19, 2012 11:54 pm

Re: Best antenna for 1mhz-50 and 1khz - 800khz

Post by rtlsdrblog » Sun Jan 13, 2019 11:13 pm

Yep it's actually huge antennas for VLF/HF, and small antennas for UHF+. Optimal sizing is dependent on the wavelength which decreases as frequency goes up.

snn47
Posts: 114
Joined: Tue Dec 27, 2016 11:00 pm

Re: Best antenna for 1mhz-50 and 1khz - 800khz

Post by snn47 » Fri Jan 18, 2019 4:56 am

You might try an active antenna the cheapest form is a short whip with an associated pre-amplifier For starter from an old active car antenna could do, since it had to work for AM and FM.
or you might just put 5 or more meter of wire up. For receive you can get away with a lot and still receive signals. You can always improve with time

Post Reply