Has anyone got this combination to work successfully? I've adhered strictly to the installation article & both SDRSharp and HDSDR work, so why should I get the messge "No available RSPs found. Please check USB cables, device drivers, or if the RSP is in use in another application"?
I would be grateful for pointers as to how to fix this problem please.
SDRUno + RTL-SDR V3 + Windows 10
Re: SDRUno + RTL-SDR V3 + Windows 10
Looking to play with the NEW scanner feature on SDRUNO on V1.3 ???
At this moment it does not appear that V1.3 supports anything but RSP units.
If you want to use your RTL dongle you probably need to fall back to V 1.2. You need to execute the SDRUNO.exio version of SRuno........ no scanner....then another file popup comes up and you select your ExtIO_RTL2832.dll file.
There are instructions on their website.
At this moment it does not appear that V1.3 supports anything but RSP units.
If you want to use your RTL dongle you probably need to fall back to V 1.2. You need to execute the SDRUNO.exio version of SRuno........ no scanner....then another file popup comes up and you select your ExtIO_RTL2832.dll file.
There are instructions on their website.
-
Lasithi773
- Posts: 10
- Joined: Mon May 27, 2019 6:08 pm
Re: SDRUno + RTL-SDR V3 + Windows 10
Well, nice to have the latest, Tim_rtd, but that might be the answer - thanks.
-
Lasithi773
- Posts: 10
- Joined: Mon May 27, 2019 6:08 pm
Re: SDRUno + RTL-SDR V3 + Windows 10
Version 1.2 definitely a non-starter with itr's small fixed screens and my failing eyesight. It sort of works, but not a patch on SDRSharp. The problem with SDRSharp is that it doesn't have an IQ output for morse decoders. Thanks for your response.
Re: SDRUno + RTL-SDR V3 + Windows 10
Sdr # has aux vfo plugins whereby you can pipe a virtual connection to a separate cw decoder.
Perhaps this won't suffice..
Perhaps this won't suffice..