Help getting KerberosSDR to work

Discuss KerberosSDR - 4x Coherent RTL-SDR
Post Reply
alexxmarsh
Posts: 1
Joined: Mon Jun 29, 2020 3:14 am

Help getting KerberosSDR to work

Post by alexxmarsh » Mon Jun 29, 2020 5:16 am

I've been trying to get it to work for a few days now. I'm using the prebuild image on a raspberry pi 3. Everything works perfectly but when I go to direction find I get a reading that is all over the place. It is the same on every frequency I have tried on 120mhz, 150mhz, 160mhz 180mhz and so on with the same reading on the compass. It jumps around with no rhyme or reason. I made a video illustrating my issue: https://www.youtube.com/watch?v=40ii8I0ktyU .

I checked and rechecked my setup and can't figure out what I am doing wrong. Any help is greatly appreciated.

rtlsdrblog
Site Admin
Posts: 2743
Joined: Mon Nov 19, 2012 11:54 pm

Re: Help getting KerberosSDR to work

Post by rtlsdrblog » Sat Jul 04, 2020 6:55 am

What is your antenna array like, and are you actually tuned to a signal? If it's just random noise being received then the directions will show randomly.

Post Reply