[RPI3] spyserver stucks at "Found Elonics E4000 tuner"

Need help installing or figuring out something about your SDR? Ask here.
Post Reply
User avatar
xRayter
Posts: 1
Joined: Sat Aug 01, 2020 3:38 pm
Location: vienna, austria

[RPI3] spyserver stucks at "Found Elonics E4000 tuner"

Post by xRayter » Sun Aug 02, 2020 10:16 am

Hello!

i have the problem that the spyserver stucks at this and then terminating it by itself.

the normal rtl_tcp is working but i want to make a remote server from a different location via the RPI3 and a LTE USB Modem (it's a Huawei MS2131i-8) or do i need to use a 3G / LTE Mobile Router?

here is the screen:
vncviewer_HxdIMFJeVa.png
vncviewer_HxdIMFJeVa.png (50.74 KiB) Viewed 111 times
another problem with my second setup from home is when i connect to my IP via SDR# (over the sdr# - spyserver list) it connects BUT the waterfall speed like sound is very laggy. no change if i use WFM or NFM.
internetspeed is 300MBit/s down and 50Mbit/s up and i am using a Cat.6 LAN cable directly to the router.

maybe some ideas to fix it? thanks!

(repost and the old one deleted because i posted in the wrong section of this forum.)

Post Reply