Quintezz DVB T usb dongle not recognized as RTL

Need help installing or figuring out something about your SDR? Ask here.
Post Reply
urbain1955
Posts: 1
Joined: Sat Nov 21, 2020 8:51 pm

Quintezz DVB T usb dongle not recognized as RTL

Post by urbain1955 » Sat Nov 21, 2020 9:00 pm

Hi all

I have a Quintezz DVB T usb dongle. I would like to use it as an SDR receiver, and I have followed all the instructions on this site.

However , in Zadig, it is not recognized as a 'Bulk-in' device..., but something else:

If I plug it in, I see the next devices appearing: (2 new lines)

Unknown device #1 (interface 1) (interface 1)
USB input device (interface 0) (interface 0)

Replacing the drivers, works, but when i start up the SDR software, no RTL device is recognized.
In the windows drivers details, there are no RTL drivers found.

could it be that this quintezz dongle is not suited for SDR listening ? I opened it , but cannot conclude whether it has the RTL chip or not.

What can I do more ?

rtlsdrblog
Site Admin
Posts: 2784
Joined: Mon Nov 19, 2012 11:54 pm

Re: Quintezz DVB T usb dongle not recognized as RTL

Post by rtlsdrblog » Sun Nov 22, 2020 3:27 am

I'm not familiar with that brand, it might not be an RTL-SDR.

Please upload a photo of the PCB, and if you can get the markings on the chips that would help. I can see if it's actually an RTL-SDR then.

Post Reply