Installing Remote SDR V2 on a Raspberry Pi 4B

Remote SDR V2 is software that allows you to easily remotely access either a PlutoSDR, HackRF or RTL-SDR software defined radio. It was originally designed to be used with the amateur radio QO-100 satellite, but version 2.0 includes multiple demodulation modes, NBFM/SSB transmission capability, CTCSS and DTMF encoders, modulation compression and a programmable frequency shift for relays.

Over on the programmers blog, F1ATB has put out a new post showing how to install Remote SDR V2 on a Raspberry Pi 4B. The installation has been made simple thanks for a ready to use SD card image.

If you're interested in an overview of Remote SDR V2, we have posted previously about a Tech Minds review of the software.

Remote SDR V2 with a PlutoSDR
Tweet36
Share43
Reddit1
Vote
Email
80 Shares

Related posts:

  1. Tech Minds: Remote SDR V2 with Orange Pi and Transmit Capable
  2. Video Tutorial: Installing GQRX and RTL-SDR on a Raspberry Pi
  3. Building a Remote SSB Receiver with an RTL-SDR, OrangePi and GNU Radio
  4. Remote RTL_UDP: RTL-SDR Remote Control Android App
  5. Setting up a Raspberry Pi for Ham Radio with RTL-SDR
Subscribe
Notify of
guest

1 Comment
Inline Feedbacks
View all comments
bert
#221628

I use a USB over CAT adapter, doing the same to 30 meters

0
Reply