KerberosSDR Now Available for Pre-order on Indiegogo

We're happy to announce that KerberosSDR is now available for pre-order on Indiegogo.

As promised we announced the release to KerberosSDR mailing list subscribers first, so that they'd be the first to get the initial discounted early bird units. However due to much higher than expected interest, we have released a few "second early bird" units at a still discounted price of $115 + shipping. We're only going to release 300 of these so get in quick before the price jumps up to $125. Our pre-order campaign will last 30 days, and afterwards the retail price will become $150.

If you weren't already aware, over the past few months we've been working with the engineering team at Othernet.is to create a 4x Coherent RTL-SDR that we're calling KerberosSDR. A coherent RTL-SDR allows you to perform interesting experiments such as RF direction finding, passive radar and beam forming. In conjunction with developer Tamas Peto, we have also had developed open source demo software for the board, which allows you to test direction finding and passive radar. The open source software also provides a good DSP base for extension.

More information available on our KerberosSDR page, and the Indiegogo page.

KerberosSDR with Calibration Board Attached (Metal Enclosure with SMA connectors Not Shown)
KerberosSDR with Calibration Board Attached (Metal Enclosure with SMA connectors Not Shown)
KerberosSDR Main Board (Metal Enclosure with SMA connectors Not Shown)
KerberosSDR Main Board (Metal Enclosure with SMA connectors Not Shown)

21 comments

  1. Lars

    I am thinking of using the KerberosSDR as a receiver for an L-band microwave radiometer. Applications would for example be the measurement of soil moisture at 1400-1427 MHz. Therefore, I’d like to know if it would be feasible to connect one or two LNA’s plus band pass filter after the calibration board?

  2. Bill

    The indiegogo page says that a Linux computer is required; surely that’s just due to the software you have created so far? Any reason why supporting Windows software can’t be made (by anyone) ?

    • Timmy

      There is no reason why Microsoft Windows or OSX or FreeBSD or GNU Hurd or HaikuOS or Solaris or HP-UX or AIX …. or insert any other random Operating System could not (eventually) be supported.

      My guess would be that the developers are using the operating system which they are most familiar, and also that they can easily stand on the shoulders of many other developers to leverage existing tools and libraries to reduce their workload. And focusing on one operating system would help them to maximise results, which would mean more advanced tools a lot faster. Considering how few open source phase coherent SDR tools currently exist, I’d see that as a very good thing. I’m sure once the actual hardware is in the hands of many more software developers with strong DSP knowledge then you will see new tools for other operating systems.

      But the hardware is already supported by all non phase coherent applications under windows. The real problem is that when it comes to public phase coherent applications, it is a mostly empty space right now.

    • admin

      It’s still an RTL-SDR, so you can use any RTL-SDR software with it, be it on Windows or Linux.

      But the phase coherent software we have developed for it is based in Linux. If someone wanted to, they could port it to Windows.

  3. AD5NL

    These guys (rtl-sdr.com and othernet.is) have a pretty good track record of delivering quality hardware.

    There might be some design compromises, or areas for improvement (I don’t have an opinion re: the comment on indiegogo regarding the impedance of the antenna traces, but that would be a hypothetical example of what I mean by potential “areas for improvement”). But I wouldn’t equate “less than perfect” with “suspicious.”

    Relative to the average indiegogo campaign, I am fairly confident that these guys will deliver something that more-or-less works.

    • Larry Springsteen

      I have used Indegogo before and wasn’t disappointed. I am very interested with this project and have an Odroid UX-4 I can use for a mobile DF platform. The local repeater club has Fox-Hunts and this would be a great use for this product. I can see an advanced application of several (4 or more) distributed around a wide area listening for an interfering signal to DF.

      73, Larry WB8LBZ
      El Paso, TX

    • admin

      Thanks for the vote of confidence. Regarding the comment about the imepedance, the PCB substrate of the calibration board is only 0.6mm thick, so the commenter probably didn’t realize as that changes the required shape slightly.

    • admin

      There are unfortunately compromises that need to be made when combining 4 dongles onto the same PCB coherently, so it’s not as clean as the V3 which is the cleanest RTL-SDR out there. USB noise is filtered via a choke. Spectrum cleanliness is more than good enough though.

      No web interface in the current version, however, it is not difficult to VNC into the SBC/computer being used with the board and control it that way.

  4. Minato

    What is the USB hub bandwidth on this thing? Can it support all SDR running at full sampling rate? If it does support that then by using calibration board we can do frequency interleaving and get a single SDR with about 4x sampling rate compared to a single V3 dongle, with that flexibility of 4 coherent SDR

Post a comment

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This site uses Akismet to reduce spam. Learn how your comment data is processed.