New Nano 3 RTL-SDR Available from NooElec

NooElec have just released their new NESDR Nano 3 RTL-SDR dongle for $27.95 USD. This is a new iteration in their line of ‘nano’ sized dongles, which are very small and suitable for use on small devices like Raspberry Pi’s and mobile phones. These nano form factor RTL-SDR dongles are also commonly used with the Stratux project which aims to bring lost cost ADS-B and UAT capabilities to small airplane pilots.

The Nano 3 appears to have a standard nano sized RTL-SDR PCB with TCXO inside, but comes with a new fully enclosed metal case with internal thermal coupling pads for cooling. A small external heatsink is also provided for optional use with the dongle. The dongle also uses a standard MCX connector, but the kit comes with an MCX to SMA F adapter. We’re not sure if the cooling from the small metal case will be enough to solve the L-band PLL lock problem, but perhaps when combined with the modified L-band driver tweak it might be enough. Failing that the external heatsink combined with slight airflow from a fan should be enough.

The NESDR Nano 3 small form factor RTL-SDR
The NESDR Nano 3 small form factor RTL-SDR

The previous model called the Nano 2, was also redesigned from the generic nano models for better cooling and to be able to use a TCXO. However, some tests by Chris of the Stratux project seem to show that the Nano 2 is quite a bit noisier than the cheaper generic nano dongles, and actually runs about 40 degrees F hotter. Noise is a problem with these small dongles as the noisy digital and switch mode sections are much closer to the RF sensitive parts. Heat is also an issue due to the lack of PCB space for heat dissipation. Hopefully the Nano 3 resolves these issues with the metal case and improved cooling.

There are now several generations and models of these ‘nano’ RTL-SDRs available. All briefly described below:

  1. Generic Nano Dongles:
    1. $16.99 USD + shipping costs.
    2. First nano dongles designed originally for DVB-T TV use. Difficult to find now, no longer seems to be sold apart from one US seller on eBay.
    3. Still a good choice, but the lack of TCXO limits the usefulness for many applications.
  2. NooElec Nano 2:
    1.  $21.95 USD without TCXO, $23.95 with TCXO.
    2. Slight redesign of the generic dongles for better cooling and TCXO. Although cooling and noise benefits are debated.
    3. Good choice if you like the Nano form factor and want a dongle with accurate TCXO clock.
  3. Stratux Dongle (with ADS-B/UAT Antennas):
    1. Two dongles for $40 USD with antennas, or two for $35 USD without antennas. We also wholesaled a few from them and sell them on our store for intl. buyers @ 16.95 USD each incl. shipping.
    2. Redesigned for low power usage and less noise. Uses a switch mode power supply for less power wastage, but designed to be unaffected by any additional switch mode noise. Runs about 60 degrees F cooler than the Nano 2 and 16F cooler than the generic. Does not have an enclosure so is a bit more fragile. Also does not have a TCXO.
    3. Good choice for Stratux or similar projects might struggle with the power requirements of multiple dongles on a Pi3. Doesn’t have a TCXO so mainly useful for frequency insensitive applications like ADS-B.
  4. NooElec Nano 3:
    1. $27.95 USD
    2. Redesigned enclosure with thermal pad coupling and heatsinks. Comes with TCXO.
    3. Untested by us, but we think it’s probably better than the Nano 2. So a good choice if you like the Nano form factor and want a TCXO dongle.

3 comments

Leave a Reply to Nick Cancel reply

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This site uses Akismet to reduce spam. Learn how your comment data is processed.