Listening to Spacewalk Communications from the International Space Station

Over on YouTube user LEGION ELMELENAS has uploaded a video showing his reception of voice communications from a Russian spacewalk on the International Space Station (ISS).

Legion used a Funcube Dongle Pro+ which is a software defined radio USB dongle similar to the RTL-SDR, but with better performance and higher cost. He also used a home made turnstile antenna, the SDRSharp software and the Orbitron satellite tracking software to automatically correct for the signals doppler shift as the ISS flies over.

International Space Station spacewalks(Russian astronauts EVA) received with Funcube Dongle Pro+

KN0CK HF Upconverting and Direct Sampling RTL-SDR Receiver Store

In previous posts we have featured Marty KN0CK’s popular modified RTL-SDR dongles which have either a miniature built in high quality HF upconverter with amplifier and filter, or an amplified and filtered direct sampling modification applied to them. With these modified dongles you can receive the HF frequencies from 0.5 MHz to 54 MHz. These kits were previously available for sale on a webstore, however that store has since closed down.

Fortunately, Marty’s modified RTL-SDR dongles are still available at http://www.kn0ck.com/HF_SDR/. The HF upconverting dongle can be bought for $75 and the direct sampling dongle at $60. The store page also shows example videos of the performance you can expect.

KN0CK HF Upconverting RTL-SDR Modification
KN0CK HF Upconverting RTL-SDR Modification
KN0CK HF DIrect Sampling RTL-SDR Modification
KN0CK HF DIrect Sampling RTL-SDR Modification

Reverse Engineering NSA Spy ‘Retro Reflector’ Gadgets with the HackRF

In 2013 whistleblower Edward Snowden leaked (along with other documents) some information about the American National Security Agencies (NSA) spy tools. One such group of tools named ‘retro reflectors’ has recently been investigated and reverse engineered by Micheal Ossmann, the security researcher behind the recently available for preorder HackRF software defined radio. The HackRF is a SDR similar to the RTL-SDR, but with better performance and transmit capabilities.

Newscientist Magazine has written an article about Ossmann’s work here. From their article a retro reflectors are described in the following quote.

One reflector, which the NSA called Ragemaster, can be fixed to a computer’s monitor cable to pick up on-screen images. Another, Surlyspawn, sits on the keyboard cable and harvests keystrokes. After a lot of trial and error, Ossmann found these bugs can be remarkably simple devices – little more than a tiny transistor and a 2-centimetre-long wire acting as an antenna.

The HackRF comes in to play in the following quote

Ossmann found that using the radio [HackRF] to emit a high-power radar signal causes a reflector to wirelessly transmit the data from keystrokes, say, to an attacker. The set-up is akin to a large-scale RFID- chip system. Since the signals returned from the reflectors are noisy and often scattered across different bands, SDR’s versatility is handy, says Robin Heydon at Cambridge Silicon Radio in the UK.

Ossmann will present his work at this years Defcon conference in August.

retro-reflector-surlyspawn     retro-relector    retro-reflector-ragemaster

 

Analyzing 433 MHz Transmitters with the RTL-SDR

Over on his blog, Yashin has written a post showing how to analyze 433 MHz transmitters using several methods. Devices that transmit using low power 433 MHz are common and often include devices such as weather monitors, power monitors and alarm sensors.

To show his analysis methods Yashin used an ASK modulated FS1000A 433 MHz transmitter connected to an Arduino Teensy microcontroller. He first uses GQRX and baudline together with an RTL-SDR in Kali Linux to test that the transmitter is working and to visually inspect the RF spectrum. Then he shows how to use GNU Radio to receive the 433 MHz transmitter and how to record an audio file. The final tool he shows how to use is rtl_433 which will automatically decode the data into binary strings using the analysis option.

ASK 433 MHz Transmitter
ASK 433 MHz Transmitter

Visualizing Doppler Signal Reflections with the RTL-SDR

Over on his blog DE8MSH has uploaded a video showing a timelapse of some Doppler signal reflections he recorded. He shows more information about his Doppler recording setup on this previous post which shows that he was even able to get a Doppler reflection from the ISS using the French Graves radar.

When an airplane or meteor reflects a signal from a strong transmitter such as an ATIS signal or the Graves radar in France, the received reflected signal frequency will change as the plane or meteor comes towards or away from your receiver. This is due to the Doppler effect. Its effect can be observed as the sloping lines shown in the video.

To do the recording, DE8MSH used HDSDR together with spectrum lab and an RTL-SDR.

Receiving Signals from the Lunar Reconnaissance Orbiter with an RTL-SDR and WiFi Grid Antenna

Gat3way has recently posted on his blog an article showing how he was able to receive a signal from the Lunar Reconnaissance Orbiter (LRO) using only an RTL-SDR, WiFi grid antenna and a low noise block (LNB). The LRO is a NASA spacecraft which is currently orbiting and being used to create maps of the moon.

The LRO transmits a tracking, telemetry and control (TT&C) signal at 2271.125 MHz which is in the S band (2 to 4 GHz). Since the S band frequencies are commonly used for Indovision satellite TV, gat3way was able to find a cheap LNB which could downconvert the GHz level S band frequencies down into a frequency receivable by the RTL-SDR. For the antenna he used a high 22dBi gain motor controlled WiFi mesh parabolic grid antenna.

After aiming the antenna at the moon, gat3way was able to clearly see the LRO carrier signal in the RTL-SDR waterfall as shown in the image below.

WiFi Parabolic Mesh Antenna for the S Band
WiFi Parabolic Mesh Antenna for the S Band
LRO Signal Received by RTL-SDR, LNB and WiFi antenna.
LRO Signal Received by RTL-SDR, LNB and WiFi antenna.

Automatic Heatmap Logging on a Raspberry Pi using an RTL-SDR and RTL_POWER

Amateur radio hobbyist DE8MSH recently wrote in to let us know about a project he has been working on. His project involves using a Raspberry Pi B and RTL-SDR to automatically log a wide band heatmap using rtl_power. Rtl_power is a command line tool that will log signal strengths to a csv file using the RTL-SDR over a very large definable bandwidth.

To do the automatic logging the Raspberry Pi runs rtl_power for 23 hours constantly writing data to a mounted hard drive. After 23 hours the heatmap image is calculated and then uploaded to a webpage at http://qth.at/de8msh/listheatmaps.php. The scheduling is performed by a cron job.

DE8MSH has also been working on a second related project over at http://www.qth.at/de8msh/hm/pic.html. The heatmap on this page shows various transmissions from weather balloons. As you mouse over those transmissions, the QTH (location) of those weather balloon transmissions is shown as well as the frequency and time of where the mouse pointer currently is.

Raspberry Pi Automatic Heatmap Logging with rtl_power
Raspberry Pi Automatic Heatmap Logging with rtl_power

Monitoring Multiple AM channels with RTL-SDR Airband

A new command line program for the RTL-SDR called RTL-SDR Airband has recently been released. The program can be used to simultaneously monitor multiple AM channels per dongle. It is intended to be used with online streaming services like liveatc.net which provide live audio streams of air traffic control communications around the world.

Its features include

  • Decode multiple AM channels per dongle (within bandwidth frequency range)
  • Auto squelch and Automatic Gain Control
  • MP3 encoding
  • Stream to Icecast or SHOUTcast server
  • Low CPU usage on Windows (<4% on i5-2430m) thanks to SSE and AVX instructions
  • FFT using GPU on Raspberry Pi (50-55% CPU with default clock)
Monitoring Multiple AM Channels with RTL-SDR Airband.
Monitoring Multiple AM Channels with RTL-SDR Airband.