1. JeffM

    this worked for me

    to install rtl_tcp to run on RPi

    download files

    from Raspberry Pi..

    open in browser:

    click the link:

    zip file will open in Archiver
    click icon upper right to extract files to /home/pi

    Installation (Linux):

    open a Terminal window and run the following commands

    sudo apt update
    sudo apt install libusb-1.0-0-dev git cmake

    cd pkg-rtl-sdr
    rm build -r
    mkdir build
    cd build
    sudo make install
    sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
    sudo ldconfig
    echo ‘blacklist dvb_usb_rtl28xxu’ | sudo tee –append /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf

    Startup from the command prompt

    replace with the IP Address of your RPi
    rtl_tcp -a -p 1234 -D 2

    to connect from a Windows PC

    SDR Radio Console and SDRSharp tested and work fine.
    Use the regular TCP setup.

  2. Chris

    What is here happend? Where have to be the File right now?
    CMake Error: The current CMakeCache.txt directory /home/geeko/rtl-sdr/pkg-rtl-sdr/CMakeCache.txt is different than the directory /home/geeko/pkg-rtl-sdr where CMakeCache.txt was created. This may result in binaries being created in the wrong place.

  3. KevinP

    if you havent gotten an answer yet. Here’s what worked for me.
    do the following one line at a time……
    cd pkg-rtl-sdr
    cmake -G “Unix Makefiles”
    make install

Post a comment

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This site uses Akismet to reduce spam. Learn how your comment data is processed.