this worked for me
to install rtl_tcp to run on RPi
from Raspberry Pi..
open in browser:
click the link:
zip file will open in Archiver
click icon upper right to extract files to /home/pi
open a Terminal window and run the following commands
sudo apt update
sudo apt install libusb-1.0-0-dev git cmake
rm build -r
cmake ../ -DINSTALL_UDEV_RULES=ON
sudo make install
sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
echo ‘blacklist dvb_usb_rtl28xxu’ | sudo tee –append /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf
Startup from the command prompt
replace 192.168.1.119 with the IP Address of your RPi
rtl_tcp -a 192.168.1.119 -p 1234 -D 2
to connect from a Windows PC
SDR Radio Console and SDRSharp tested and work fine.
Use the regular TCP setup.
What is here happend? Where have to be the File right now?
CMake Error: The current CMakeCache.txt directory /home/geeko/rtl-sdr/pkg-rtl-sdr/CMakeCache.txt is different than the directory /home/geeko/pkg-rtl-sdr where CMakeCache.txt was created. This may result in binaries being created in the wrong place.
if you havent gotten an answer yet. Here’s what worked for me.
do the following one line at a time……
cmake -G “Unix Makefiles”
How is this driver installed on a raspberry pi? The normal cmake doesn’t seem to work.
you ever figure out to make it work on a Pi?
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>
ANTISPAM: What does the 'M' in FM and AM radio stand for? (Required)
Notify me of followup comments via e-mail. You can also subscribe without commenting.
This site uses Akismet to reduce spam. Learn how your comment data is processed.