Testing an SDRplay RSPduo with Bonito Active Loop Antennas

Bonito is a company that sells various active dipole and loop antennas for ham radio and DX applications. Recently they decided to test their MegaLoop FX and MegaDipol MD3000DX antennas on an SDRplay RSPduo, and compare it against a higher end WinRadio. Bonito found that the RSPduo performed well on the weaker longwave stations, but the Winradio outperformed it on the stronger ones. The differences were due to the better dynamic range of the Winradio.

The article goes on to make some recommendations for using their antennas on the RSPduo. They write that if intermodulation due to very strong signals occurs, there are some fixes that can be applied on their antennas to desensitize them and prevent overload. With the loop, a smaller loop size should be used, and the gain selector should be set to medium or min. With the dipole, they note that shortening the elements, and using it in an L-configuration with the lower radiator pointing towards the interfering signals can be used to attenuate them out. This works because a dipole configured in a L shape provides a bit of directionality.

The article also notes how grounding, very good coax shielding, good quality USB cables and galvanic isolation are all very important for reducing noise.

Bonito RSPduo Antenna Test Setup
Bonito RSPduo Antenna Test Setup

3 comments

Leave a Reply to admin Cancel reply

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This site uses Akismet to reduce spam. Learn how your comment data is processed.