Tagged: AD9361

SweepSA: A Fast Swept Spectrum Analyzer for Pluto-Style AD936x SDRs and the HackRF

Thank you to zxkmm, one of the maintainers of PortaPack Mayhem, for writing in and sharing their new program 'SweepSA', a swept spectrum analyzer for Pluto-style AD936x SDRs such as the AntSDR E310 and LibreSDR. It also supports the HackRF One and HackRF Pro, and is designed to feel more like a bench instrument than an SDR receiver app.

One of SweepSA's core features is speed. It uses the AD936x's little-used 'fastlock' feature, which stores synthesizer profiles that can be recalled almost instantly with a full LO retune. The hop, capture, FFT, and detection all run on the board's ARM CPU, so only the reduced spectrum is sent to the PC, which avoids the slow USB or network round trip on every hop. zxkmm reports sweeps of about 10 - 60 ms over a few hundred MHz, and 500 - 800 ms over the full 70 MHz to 6 GHz range. That's similar to a HackRF One, but with each segment a gapless 40 - 56 MHz wide.

Other features include four traces, eight markers, a waterfall, zero span, and CSV/PNG export. Levels are shown in dBFS with an 'UNCAL' badge until an amplitude correction file is loaded. SweepSA is free for Windows, Linux, and macOS (arm64), with downloads available on GitHub. We note that it is currently closed source, but zxkmm plans to publish the source code later.

Decapping the AD9361 SDR Transceiver Chip: Hi-Res Images and Cost Analysis

The AD9361 is a highly versatile full transceiver SDR chip released by Analog Devices back in 2013. With a frequency range from 70 MHz - 6 GHz, 56 MHz bandwidth and 12-bit ADC, it is most commonly found in high end SDRs such as the USRP range and PicoZed. On Digikey purchasing the chip today would set you back about USD $280. A cheaper but similar AD9363 chip is found in the PlutoSDR.

If you are unaware, decapping is the process of removing the outer shell on silicon chips with acid, and revealing their silicon structure. Over on the 'Zeptobars' decapping blog the author has recently shared some beautiful and extremely hi-res (80 mB) photos of a decapped AD9361.

At the end of the post the author does a brief cost analysis on the chip, determining that  while the total manufacturing cost of the chip is estimated at less than $5, the cost of R&D and IP per chip is about $33, and additional costs make up another $32 per chip. Profit between distributors and Analog Devices is about even, which each party taking about $100 per chip each.

If you're interested, in the past we've also seen decapped images of the the R820T and the RTL2832U from 'electronupdate'.

AD9361 Decapped
AD9361 Decapped on the Zeptobars blog