Tagged: mini pcie

XTRX: Soon to be crowdfunding Mini PCIe based TX/RX SDR

Over on the crowd funding site crowdsupply.com there have recently been several updates on the Fairwaves XTRX SDR. The XTRX is an upcoming TX/RX capable SDR in a tiny Mini PCIe form factor. Mini PCIe is the expansion slot system used on some laptops. The SDR itself will be 2 x 2 MIMO, with a tuning range of 10 MHz - 3.7 GHz (down to 100 kHz with some degradation), and have a sample rate of up to 120 MSPS. It uses the LimeSDR RF chipset which provides most of the hardware required.

The XTRX is not yet for sale, and is planned for a crowdfunding run on Crowdsupply 'soon'. You can subscribe to future updates on their page. No word yet on pricing, but according to one of the developers comments on Reddit the price will be somewhere between the LimeSDR ($299 USD) and LimeSDR Mini ($139 USD). Eventually in the future if they can tap into a mass market they hope to get the price down to $50 USD.

Features & Specifications

  • RF Chipset: Lime Microsystems LMS7002M FPRF
  • FPGA Chipset: Xilinx Artix 7 35T
  • Channels: 2 × 2 MIMO
  • Tuning Range: 30 MHz - 3.8 GHz
  • Rx/Tx Range:
    • 10 MHz - 3.7 GHz
    • 100 kHz - 3.8 GHz with signal level degradation
  • PCIe Bandwidth:
    • PCIe x2 Gen 2.0: 8 Gbit/s
    • PCIe x1 Gen 2.0: 4 Gbit/s
    • PCIe x1 Gen 1.0: 2 Gbit/s
  • Sample Rate: ~0.2 MSPS to 120 MSPS
  • Reference clock:
    • Frequency: 26 MHz
    • Stability: <10 ppb stability after GPS/GNSS lock, 500 ppb at start up
  • Form Factor: full-size miniPCIe (30 × 51 mm)
  • Bus Latency: <10 µs, stable over time
  • Synchronization: synchronize multiple XTRX boards for massive MIMO
  • GPIO: 4 lines @ miniPCIe connector, 3 lines @ FPC edge connector
  • Accessories: miniPCIe-USB3 converter, miniPCIe-PCIe converter, etc
XTRX Prototype
XTRX Prototype