Tagged: door lock

Reverse Engineering Linear DX Wireless Door Locks

Employees at the network data security company Duo recently had their interest piqued when they discovered that their office’s keycard based door system had a wireless remote which was used by reception to unlock and lock the door. The device was a DX model magnetic lock created by Linear.

After noting down the FCC ID printed on the device, they determined that the operating frequency was 315 MHz. They discovered from the documentation that each wireless DX device is encoded with a unique code that is precoded at the factory. Only remotes with the correct code programmed in can open the door.

The first attack they tried was a simple replay attack. They used a HackRF to record the signal, and then play it back again. This worked perfectly first time.

Next they decided to take this further and reverse engineer the protocol and see if a brute force attack could be applied. By doing some logic analysis on the circuit, they were able to figure out how to iterate over the entire key space. It turns out that the lock can be brute forced in at most 14.5 hours, or 7.25 hours on average.

The Linear DX Wireless Door Lock
The Linear DX Wireless Door Lock