FoxSDR Updates: Node Canvas, Single Map Display, Linux+Android Builds, Locating Air Traffic Radar Positions
Thank you to wonderingStars for writing in and sharing updates to his FoxSDR software program. FoxSDR is a new AI-coded software that supports all common protocols and SDRs.
The first update that wonderingStars notes is the addition of a node canvas where you can wire radios, decoders, speakers, and displays together. It can run up to five SDRs at the same time, each with its own decoders. This is now FoxSDR's main screen.
The second update is a map that can accept multiple inputs from multiple decoders, allowing users to plot various data streams such as ADS-B, AIS, amateur high-altitude balloons, and more on a single map.
The third update is that Linux x64 builds are now published, although they are noted to still be in development. An Android arm64 build has also been released in alpha form. To access this, users will need to sign up to test.
The final update adds a new radar sweep feature, which locates the positions of air-traffic radars around you by listening to 1090 MHz. The author explains:
Secondary surveillance radars rotate and interrogate aircraft transponders as their beam passes. Aircraft that broadcast ADS-B also report their own position, so every reply they give reveals where a radar was pointing at that moment. Radar Sweep collects these replies over hours and works out each radar's location, rotation speed and direction on its own. It then draws bearing lines towards aircraft that answer the radar but broadcast no position, and marks a position where two radars' lines cross.
It is the same idea as PlanePlotter's Beamfinder, except that Radar Sweep finds the radar sites itself instead of being given them. It is not affiliated with PlanePlotter or its authors.
In testing on a 12.8-hour recording, it confirmed two radars, each within about 5 km of a published airfield position. Bearings to held-out aircraft had a median error of 0.3°.
You need a 1090 MHz antenna, an SDR running at 2 MS/s or more, and a few hours of traffic. Radar Sweep remembers the radars it finds and never reveals your location.
It is available free to FoxSDR users in the United States.
The author also wanted to share an upcoming feature, which is the GUI builder, which will allow you to customize your own GUI.
AI Disclaimer: wonderingStars describes their company as a human-gated AI company, and FoxSDR is AI coded.
