An ADS-B Decoder for the GOMX-3 Satellite ADS-B Repeater

The GOMX-3 is a CubeSat which carries an experimental ADS-B repeater. Since it is a satellite the experimental receiver hopes to be able to receive ADS-B from orbit, then beam it back down to earth at a frequency of about 437 MHz using a GFSK at 19200 baud high data rate transmission protocol. From space the GOM3-X satellite can see many aircraft at one time and space based tracking allows for aircraft tracking over oceans.

Recently the creators of the satellite, GomSpace released a complete decoder for the ADS-B downlink, and now it has also been turned into a GNU Radio flowgraph by Daniel Estevez which can output decoded aircraft position data directly to a KML file which can then be opened in Google Earth or similar. This blog by DK3WN shows several logged decodes of the satellite and shows what the signal looks like in SDR#. Some of his posts also curiously shows what looks to be a Windows decoder, or logger, though we were unable to find a download for it.

Decoding the downlink should give you real time ADS-B data in your area, but the full log of stored stored data is apparently only downloaded when the satellite passes over the GomSpace groundstations which are mostly located in the EU.

[Also mentioned on Hackaday]

The GOMX-3 ADS-B Downlink Signal.
The GOMX-3 ADS-B Downlink Signal.
Aircraft detected by the GOM3-X Satellite ADS-B Receiver.
Logged aircraft detected by the GOM3-X Satellite ADS-B Receiver. Major flight corridors are visible.

One comment

Post a comment

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This site uses Akismet to reduce spam. Learn how your comment data is processed.