HackerGadgets Releases a 4-in-1 RTL-SDR, LoRa, GPS and RTC HAT for the Raspberry Pi

Thank you to Shelly from HackerGadgets for writing in and sharing their new Raspberry Pi 4-in-1 HAT, which puts an RTL-SDR, a LoRa radio, a GNSS receiver, and a real-time clock onto a single board that sits on top of a Raspberry Pi.

The RTL-SDR section uses an RTL2832U with an R860 tuner. It covers 100 kHz to 1.74 GHz, with HF direct sampling from 100 kHz to 28.8 MHz. It also has a TCXO and a software-controlled 5V bias tee. The LoRa side uses a Semtech SX1262 covering 860 - 960 MHz with up to 22 dBm output and Meshtastic support. The board also has a GPS/BDS GNSS receiver that works with active or passive antennas, and a PCF85063A RTC chip with a rechargeable 3V coin cell.

HackerGadgets suggests ADS-B tracking, NOAA weather satellite reception, Meshtastic off-grid messaging, and vehicle or drone positioning as potential uses. Having GPS and a battery-backed RTC on the same board should be useful for portable or off-grid Pi builds where there is no network time to sync to. So far we have not seen any reviews or demonstrations of the product in action, but we will update if we do.

HackerGadgets Raspberry Pi 4-in-1 RTL-SDR, LoRa, GPS and RTC HAT
HackerGadgets Raspberry Pi 4-in-1 RTL-SDR, LoRa, GPS and RTC HAT
Subscribe
Notify of
guest
0 Comments