Since September 2016 we’ve been slowly hearing news about the PantronX Titus II portable SDR system, but as of yet nothing seems to have eventuated. The Titus II is essentially an Android touch screen tablet running their custom software, a set of speakers, an antenna and an SDR chip with 100 kHz to 2 GHz tuning range all in one portable system that has been estimated by them to retail for less than $100 USD. The main goal with the system is to provide low cost receivers for digital broadcast standards like DRM, DAB and DAB+ to try and boost their popularity.
Titus II receiver features include:
- DRM in the AM bands (MW, SW, LW) and VHF bands (FM-band, VHF band-I, VHF band-III) with latest xHE-AAC audio codec.
- DAB Classic/DAB+ (VHF band-III).
- FM stereo with RDS (Service Signaling).
- AM with AMSS (AM Signaling Service).
- Integrated service list management and service selection.
- DRM/DAB Data Apps: Text Messages, Dynamic Label/DL+, Journaline, (Categorized) Slideshow, EPG, Transparent File Transmission (e.g., for educational services), etc.
- Remote Radio Hotspot: Built-in WiFi hotspot feature, which allows any mobile device with an HTML5 web browser to connect to the Titus II via Wi-Fi, select radio services, listening to aud (HTML5 audio streaming) and accessing all the DRM/DAB data apps.
- Recording feature and Archiving interface to select existing recordings for playback.
Recently there has been some new news over on the Radioworld.com magazine about radio broadcasting stating that the Titus II is now ready for production. They write:
Titus SDR, a division of PantronX, says the Titus II multi-standard digital radio receiver is ready for production.
The consumer software-defined radio digital receiver platform, which is the result of collaboration between Titus SDR/Patron X, Jasmin-Infotech, TWR, and Fraunhofer IIS, supports multi-standard radio reception, including DRM, DAB and DAB+ and core data applications. The system is based on a custom Android tablet platform, featuring multipoint touch, WiFi/Bluetooth and stereo sound.
Titus II units will be available as a stand-alone product from Titus SDR as well as from selected OEMs. Titus SDR explains that as a module, Titus II can serve as a full-featured basis for third-party product development, adding that PantronX provided the platform and RF expertise, while Fraunhofer IIS enabled the digital and analog radio features.
With latest xHE-AAC audio codec, Titus II supports DRM in the AM and VHF bands; DAB/DAB+; FM stereo with RDS; AM with AMSS; integrated service list management and service selection; DRM/DAB data apps; text messages and Journaline.
No news yet on exact release dates, but if you are interested you can sign up to their pre-order notification list at titusradio.com.
From YouTube we’ve also found a short video of them demonstrating the Titus II from DBS2017 back in March. Another video showing the interface up close can be seen here.